260-774_ALT_1.jpg
260-774_ALT_1.jpg
 
260-774_ALT_0
 
260-774_ALT_1
 

Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H

Brand:| Model: F1691
Overview
This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for large rack cabinets or speaker cabinets. 1" diameter x 1" thick.
Part # 
260-774
Weight: 0.0462 lbs.  
IN STOCK
Your Price
$0.74
Buy 10-99 $0.63
Buy 100-499 $0.58
Buy 500-up$0.46
Part # 260-774
Qty:  EA
Available Payment Methods

Product Details

Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H
This heavy-duty rubber foot offers a sure grip on all types of surfaces. Ideal for large rack cabinets or speaker cabinets. The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. 1" diameter x 1" thick. Mounting hardware not included. Sold individually.


Product Specifications
  • Construction MaterialRubber
  • Color / FinishBlack
Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H
  • BrandPenn-Elcom
  • ModelF1691
  • Part Number260-774
  • UPC844632042430
  • Product CategoryCase & Cabinet Feet
  • Unit of MeasureEA
  • Product Rating
    (16 Reviews)
  • Weight0.0462 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H
in the Case & Cabinet Feet product category.

Reviews

Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H
Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H is rated 4.8125 out of 5 by 16.
Rated 5 out of 5 by from Best Quality Rubber FeetPenn-Elcom make the highest quality rubber feet ~ hands down. These are a bit taller than typical guitar amp feet but perfect for a custom pedal board. They wear well and won't fall apart like the import stuff I used to source from a well known auction site.Penn-Elcom makes really high quality amp & cabinet handles, corners, latches, knobs, etc. You won't find better quality and Parts Express is the best on-line source I've found.
Date published: 2014-10-16
Rated 5 out of 5 by from They're rubber feet.Nicer than the plastic garbage they replaced. They should outlast me.
Date published: 2014-07-20
Rated 5 out of 5 by from grill spacersI ordered a quanity of these for spacers between my grills and cabnets. Just enough clearence for my cone extusion and vibration isolation for my grill to cabnet contact. Highly recommended for the serious cabnet builder.
Date published: 2012-10-25
Rated 5 out of 5 by from Heavy Duty FootThese are what they are.....heavy duty rubber feet. I have used them on several projects and will purchase again. Shipping cost may be prohibitive unless purchased with other items.The mounting hole will accept a #10 bolt, and the mounting hole "depth" is about 3/8" when the bolt is inserted all the way (internal bolt stop to bolt exit, foot top).
Date published: 2012-06-04
Rated 5 out of 5 by from Works great on cabinets.I build guitar and bass cabs and these feet work just fine.They have a metal washer inside so the screws dont pull thru.
Date published: 2010-08-18
Rated 5 out of 5 by from Can be Used for Things other Than Just Feet.I used these 1" rubber feet to make a Dayton metal Grill easily removable on their Birch Cabinet (262-882 & 245-325). I used 1/4-20 bolts and 1/4-20 allthread couplers from a local hardware store. I permanently bolted the couplers to the grill, and screwed the 1" rubber feet to the cabinet. (The couplers I bought were smaller than a normal 1/4-20 nut so I had to wrap it with some good quality 3M electrical tape so would make a snug fit inside the rubber foot.) These Rubber feet will hold a cover securely if you get an approximately 7/16" diameter bolt, coupler, etc. to fit inside its center hole. It works good as a Rubber Foot Too!!! Highly Recommend.
Date published: 2010-01-04

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H

do you sell the bolt that screws itoe the bottom of the speaker, 1/4 #20 ?

Asked by: nooc

What mounting hardware do I need?

Asked by: Valeriy G.
You can use fasteners based on the material you'd be attaching to, anything from a #6 or #8 screw, up to a 3/16" bolt will be fine. The type and length of fastener should be determined by the application.
Answered by: RussR
Date published: 2012-02-01

Customer Projects

Customer projects that include: Penn-Elcom F1691 Rubber Cabinet Foot 1" Dia. x 1" H

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software