Overview
Add stable power to your amplifier boards and amp projects using this rectifier board that's built with 35,000 microfarads of power-buffering, ripple-reducing capacitance. Four high performance, ultra-fast ST Electronics' STTH1602 diodes are combined with ceramic capacitors for minimum harmonics.
AC power is applied to the input (positive on the AC1 X terminal, negative on the AC2 X terminal, with center taps connected to the inside AC1 and AC2 terminals if used), with positive DC output on the VDD/POS terminal and symmetrical negative DC output on the VEE/NEG terminal. An LED indicator shows the voltage output for each channel.
Note: To calculate voltage output, multiply the secondaries voltage by 1.414 (the square root of 2). For instance, if you were to connect a 110 VAC primary input to two 75 VAC secondary output transformer to this rectifier board, the output would +106 VDC and -106 VDC.
Specifications:
• Repetitive peak reverse voltage (VRRM): 200V
• Supply voltage: 0 to 100 VAC
• RMS forward current: 20A
• Forward voltage drop: 1.1V
• For use with devices up to 2,000 watts
• Dimensions: 6" L x 4.5" W x 2.5" H (152.4 x 114.3 x 63.5 mm)
Specifications
13100
Q&A
13100
Reviews
13100
Manuals & Resources
13100
MONSTER DEAL
OF THE WEEK
$34.98 EACH
SAVE 30%
Lepai LP‑168HA 2.1 2x40W Mini Amplifier + 1x68W Sub Output
