Behringer CT100 Cable Tester 6-in-1

Brand:| Model: CT100
The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone ( 1 /4 ", 1 /8 ", TT), RCA and MIDI.
  • Three modes: cable test mode, installed cable test mode and test tone mode
  • Accepts XLR, mono and stereo TRS phone ( 1 /4 ", 1 /8 ", TT), RCA, and MIDI connectors
  • Continuity check, intermittent detect
  • Phantom power and grounded shield detect
  • Test tone generation (1 kHz and 440 Hz)
  • Battery operation (requires two AA alkaline batteries)
Part # 
Weight: 2 lbs.  
List Price$44.99
You Save33%
Your Price
Part # 248-734
Qty:  EA
Available Payment Methods

Product Details

Behringer CT100 Cable Tester 6-in-1

The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone ( 1 /4 ", 1 /8 ", TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LEDs indicate proper shield connection and phantom power presence. The CT100 also offers an installed cable test mode and a continuity check plus a test tone generator.

Behringer CT100 Cable Tester 6-in-1
  • BrandBehringer
  • ModelCT100
  • Part Number248-734
  • UPC689076750677
  • Product CategoryCable Checkers
  • Unit of MeasureEA
  • Product Rating
    (27 Reviews)
  • Weight2 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Behringer CT100 Cable Tester 6-in-1
in the Cable Checkers product category.


Behringer CT100 Cable Tester 6-in-1
Behringer CT100 Cable Tester 6-in-1 is rated 4.6667 out of 5 by 27.
Rated 5 out of 5 by from Handy device that every tech should have!Cable testers are a handy thing to have. The fact that this is also a test tone generator makes it even better! Plus, it generates tones at both -10 and +4! Get one...you'll be glad you did!
Date published: 2015-02-14
Rated 5 out of 5 by from Great little tester for a variety of cablesWorks great! I really like the fact I can test installed cables. Should have had this long ago.
Date published: 2014-11-10
Rated 5 out of 5 by from Excellent simple to use testerWhen building/repairing numerous cables it's easy to swap the odd pin connection inadvertently. This tester makes quick work of identifying wrong pin connections.Also had an intermittent function that allows you to pull/wiggle and manhandle a cable being tested and it will tell you if there are any split second breaks indicating a bad wire or connection... very handy for road worn cables.
Date published: 2014-01-31
Rated 5 out of 5 by from Does exactly what I neededI have PA sound as a hobby, and in order to put together systems I can afford everything is used, sometimes including cables. This tester has been very useful testing cables before setting up and helps debug problems quickly.
Date published: 2014-01-23
Rated 5 out of 5 by from This really worksThis is a very simple tool on the outside but it does some very fine work. The intermittent test is most useful on cables that are frequently coiled and stored.It would be helpful to have a pair of turn-arounds for those special cables and snake feeds.
Date published: 2013-08-29
Rated 4 out of 5 by from Good value.Idiot-proof, compact, extremely sturdy. All metal enclosure with good quality jacks, simple to understand LED readouts. Runs on 2 AA batteries.Features that set this apart from the slightly cheaper Pyle-Pro PCT10 are:-'Test tone' function which sends a known volume signal down the line. Very helpful in level adjustments down long chains of equipment.-'Intermittent' issue indication - This is what made me choose this model. If there's even the shortest dropout, the LEDs indicate it. Intermittent issues are the most annoying and can be difficult to troubleshoot.My only complaints:-The a small screw holding the battery cover on stripped immediately when initially inserting batteries. It was like carving a bar of soap with a knife. Quite frustrating. Used my Dremel to change it from phillips into a slotted screw, and managed to get it out.-There's an included belt clip that attaches with two screws on the back. This clip blocks access to the battery compartment, which is ridiculous. Luckily I have no need for the clip. I used one of the screws intended for the clip as a replacement to the stripped battery cover screw.-No rubber feet on the bottom + metal enclosure + battery cover screw = sliding around and marring whatever it sits on. I stuck some re-purposed rubber feet on the bottom.After the few 'problem solving' situations mentioned above, this thing is a 5 star product. Too bad they couldn't go the extra step to make it 5 star out of the box.
Date published: 2013-07-18
  • 2015-07-04T07:11CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_US, sid_248-734, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Behringer CT100 Cable Tester 6-in-1

Customer Projects

Customer projects that include: Behringer CT100 Cable Tester 6-in-1

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software