182-490_ALT_4.jpg
182-490_ALT_4.jpg
 
182-490_ALT_0
 
182-490_ALT_1
 
182-490_ALT_4
 

Xantech 282D Designer Emitter

Brand:| Model: 282D
Overview
The 282M Designer Emitter contains a tiny infrared LED housed in a miniature, diamond shaped plastic shell. It emits IR control signals sent to it by IR receivers or other Xantech controllers. The 282M can be installed directly on the IR sensor window of the controlled device or other location.
Part # 
182-490
Weight: 0.5 lbs.  
IN STOCK
List Price$21.00
You Save38%
Your Price
$12.89
Part # 182-490
Qty:  EA
Available Payment Methods

Product Details

Xantech 282D Designer Emitter

The 282M Designer Emitter contains a tiny infrared LED housed in a miniature, diamond shaped plastic shell. It emits IR (infrared) control signals sent to it by IR receivers or other Xantech controllers. The 282M can be installed directly on the IR sensor window of the controlled device or other suitable location. The Designer Emitter is designed to be installed directly on the IR control window of the equipment. The almost black (deep purple) shell passes infrared (IR) leaving access to the original remote controller while at the same time making the most unobtrusive installation possible. The designer emitters are made of a deep purple Lexan® for improved infrared pass-through, allowing a greater range of direct control of components from hand-held controllers.

Specifications: • Non visible, high output version • New deep purple Lexan® shell • Clear adhesive film • Two 1/2" pieces of double-sided clear adhesive tape • Lead is terminated with a 3.5 mm mono mini plug • Length of wire: 10 feet.



Xantech 282D Designer Emitter
  • BrandXantech
  • Model282D
  • Part Number182-490
  • UPC042777315574
  • Product CategoryIR Emitters
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight0.5 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Xantech 282D Designer Emitter
in the IR Emitters product category.

Reviews

Xantech 282D Designer Emitter
Xantech 282D Designer Emitter is rated 4.4 out of 5 by 5.
Rated 5 out of 5 by from Small size made ideal fit with DTV Pal PlusI am using this emitter on a DTV Pal Plus digital to analog TV converter box. It is ideal for this application because the IR receiver on the box is in a recessed area. The small lens on the emitter fits easily within the recessed area.
Date published: 2009-05-15
Rated 4 out of 5 by from Works as advertisedI'm very happy with the Xantech 282M/RP Mouse Emitter. It has sufficient range and field of view to operate multiple IR devices located on multiple shelves within a single cabinet.
Date published: 2009-02-06
Rated 4 out of 5 by from Very good productI was able to take the case off of the LED and intall this into my Grafix eye light controller. The cord was also easy to extend.
Date published: 2008-07-22
Rated 5 out of 5 by from TiVo CompatibleTiVo CompatibleThis little jewel worked first time and it looks good. I have 3 TiVo's in the house with cable and never needed the IR controller. I change to Comcast and they became the most important part of the set up and NO one in the area carried any type of IR controller, not ever RadioShack.I simply plug in the Xantech 282M/RP Mouse Emitter and follow the on screen instructions from TiVo and we were back to channel changing.
Date published: 2008-03-31
Rated 4 out of 5 by from Xantech mouse emitters work perfectly everytime.The mouse emitters work everytime without exception. And they are small enough to easily hide and conceal even on equipment that is at eye level. The IR is bright enough that one emitter is attached to the wall across the room from the equipment and the equipment still receives the signal.
Date published: 2008-01-28

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Xantech 282D Designer Emitter

In the picture above, I see the yellow emitter apparatus and another black looking item. what is the second black item? It is an emitter also, does it come if I purchase a 282D? are these compatible with the same units as the 283 emitters?

Asked by: BobHa
The yellow portion is just a 3.5mm plug that makes the connection to the hub, the black end is the actual emitter. These will work in the same way as a 283D emitter, the only difference being the 283D is a blink emitter.
Answered by: MattP
Date published: 2014-01-22

Customer Projects

Customer projects that include: Xantech 282D Designer Emitter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1