182-882_ALT_0.jpg
182-882_ALT_0.jpg
 
182-882_ALT_0
 

Wired Home WHIREB IR Emitter Blaster

Brand:| Model: WHIREB
Overview
Wired Home's WHIREB IR emitter blaster has the ability to flood multiple components within a rack with IR control commands, reducing the clutter caused by attaching an emitter to each device to be controlled.
Highlights
  • Floods a component rack or cabinet with IR
  • Peel-and-stick design
  • 10 ft. control cable with 3.5 mm mono plug
  • Deep purple blaster body is inconspicuous—even in plain view
  • Wide bandwidth design—compatible with nearly all IR equipment on the market
Part # 
182-882
Weight: 0.09 lbs.  
IN STOCK
List Price$19.99
You Save25%
Your Price
$14.90
Buy 4-up$14.25
Part # 182-882
Qty:  EA
Available Payment Methods

Product Details

Wired Home WHIREB IR Emitter Blaster

Wired Home's WHIREB IR emitter blaster has the ability to flood multiple components within a rack with IR control commands, reducing the clutter caused by attaching an emitter to each device to be controlled. At the same time, this reduces the number of emitter ports occupied on an IR hub, allowing for a single hub to be used over multiple zones. Each emitter blaster has been designed using a very deep purple plastic and easily disappears from view within a room; the peel-and-stick adhesive attaches to almost any surface for trouble-free, long lasting service. All IR commands between frequencies of 30-100 kHz are passed, ensuring compatibility with nearly every IR system and source component on the market. A 3.5 mm mono plug has been attached to the 10 ft. control cable for quick connection to a Wired Home hub such as the small WHIRH IR hub or WHIRDH wall plate IR hub.

Specifications: • IR frequency bandwidth: 30-100 kHz • 10 ft. control cable • Dimensions: 1" H x 0.63" W x 0.375" D. Note: Wired Home IR hub, 12 VDC power supply, multi-conductor wire, and Wired Home target required for proper operation. Designed to be placed adjacent to equipment under control. Do not place directly on source components.



Wired Home WHIREB IR Emitter Blaster
  • BrandWired Home
  • ModelWHIREB
  • Part Number182-882
  • UPC844632070327
  • Product CategoryIR Emitters
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight0.09 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Wired Home WHIREB IR Emitter Blaster
in the IR Emitters product category.

Reviews

Wired Home WHIREB IR Emitter Blaster
Wired Home WHIREB IR Emitter Blaster is rated 4.2 out of 5 by 5.
Rated 5 out of 5 by from Needs a Hub Designed to Power BlastersI learned the hard way, blasters require more power than flashers. I originally tried this blaster with the WHIRH hub (Part # 182-860) and the effective operational range was less than a foot. I purchased the WHRDH hub (Part # 182-884), and now the blaster controls four different devices from a range of 24 ft. The WHRDH has a dip switch that can be set to increase the output to the level required to drive a blaster.Be aware, if the devices you are trying to control simultaneously see more than one IR source (e.g. a standard remote and a blaster or a blaster and a flasher), your devices may get confused and refuse to accept any commands. Blasters put out a lot of light, so you need to be a little careful on placement.
Date published: 2011-11-22
Rated 5 out of 5 by from IR BlasterGreat product. Amazing range and angle of operation.
Date published: 2011-03-31
Rated 5 out of 5 by from Meets all expectations.Meets all expectations.
Date published: 2009-06-19
Rated 1 out of 5 by from Disappointed with rangeNeeded for the home theater but am disappointed with its limited range. May work well in a cabinet.
Date published: 2009-04-22
Rated 5 out of 5 by from Great IR BlasterIR blaster can be set anywhere in the neighborhood of necessary component and IR signals reliably arrive. Great product.
Date published: 2008-12-13

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Wired Home WHIREB IR Emitter Blaster

can I use this I R emiter to control a Verizon cable box thats hidden inside a cabinet, with just the emiter exposed?

Would I be able to use the same remote that came with the box? Thanks Larry
Asked by: Larry the Lizard
In order to control your device(s) in the manner you describe, you would require at least one target, one hub, and one emitter. The targets are available in various styles; this is where you would point the remote control for your device(s). The hub supplies power and interface for the components, and the emitter is what finally transmits the IR signal to your device(s). We have these components individually, or in kits which include all these components. I've linked a few such kits below for your convenience. And yes, once the system is installed, you can use the original remote that controls your device. Our repeater systems simply carry (repeat) that IR (infra-red) signal from your remote(s) to your device(s).
Answered by: RussR
Date published: 2011-10-29

Customer Projects

Customer projects that include: Wired Home WHIREB IR Emitter Blaster

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1