100-029_ALT_2.jpg
100-029_ALT_2.jpg
 
100-029_ALT_0
 
100-029_ALT_1
 
100-029_ALT_2
 

Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft.

Brand:| Model: SKRL-10-100
Overview
Wired Home's SKRL speaker wire is designed to complement any high-end audio system. Features a clear, flexible PVC insulation and OFC configured in a rope-lay configuration to minimize skin effect. 10 AWG, 100 ft spool.
Highlights
  • 413 x 36 AWG wire construction
  • Guarantees maximum power transfer and high damping factor
  • High-density rope lay copper stranding for superior flexibility and electrical efficiency
  • Durable, pliable clear PVC insulation withstands abuse
  • Extremely low capacitance and inductance
  • Polarity ridge for easy polarity identification even in low light
Part # 
100-029
Weight: 10 lbs.  
IN STOCK
List Price$135.99
You Save52%
Your Price
$64.74
Buy 4-up$59.52
Part # 100-029
Qty:  RL
Available Payment Methods

Product Details

Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft.

Wired Home's SKRL speaker wire is designed to complement any high-end audio system. Oxygen free copper (OFC) is configured in a rope-lay configuration to minimize skin effect which causes high frequency roll-off. Clear, flexible PVC insulation withstands abuse and is rated up to 140°F (60°C). The primary identifying polarity feature for the Wired Home OFC Speaker Cable is a ridge on the outer edge of one conductor. Feeling for the ridge allows you to easily identify the polarity even in low light conditions. Construction: 413 strands x 36 AWG per conductor. Also available in 50 and 250 ft. rolls and 12, 14, and 16 AWG.



Product Specifications
  • Wire Gauge10 AWG
  • # of Conductors2 Conductor
  • Jacket ColorClear
  • Length100 ft.
Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft.
  • BrandWired Home
  • ModelSKRL-10-100
  • Part Number100-029
  • UPC844632055393
  • Product CategorySpeaker Wire
  • Unit of MeasureRL
  • Product Rating
    (8 Reviews)
  • Weight10 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft.
in the Speaker Wire product category.

Reviews

Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft.
Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft. is rated 4.875 out of 5 by 8.
Rated 5 out of 5 by from PERFECT PERFORMANCE & FINISHHaving upgraded a separate dedicated 2.0 stereo music and 5.1 surround system, my sense was that the 14AWG RCA wire to my speakers was inadequate. On the verge of buying high-priced cables, I opted to acquire this 10 AWG wire and build my own cables. Using this incredible wire, banana plugs, and Kontak electrical contact cleaner, I have achieved 100 feet of stunning musical performance for $125. My Axiom M80 towers, Martin Logan towers, and Music Hall Marimbas sing with SKRL-10 speaker wire. If you value music listening, you owe yourself the favor of buying this product. The sonics, construction, appearance, and value of this wire are truly remarkable in today's market place. [NOTE: Primary stereo system includes Onkyo A9070 amplifier, Onkyo C7070 CD/MP3 player, TASCAM C222MKIII tape/CD player and recorder, and KAB modified Technics SL-1210MK5 turntable with Denon DLS1 MC cartridge.]
Date published: 2014-02-26
Rated 4 out of 5 by from You can do it over and over again or you ca do it once and for all.I've been making high-end audio speakers for over 40 years and know where to save money and where it is simply not worth going for second best. This wire is by far the best I have used. Whether it is in the 16, 14, 12, or 10 gauge, SKRL speaker wires simply deliver the most accurate details of any other. Their high braid count of fine, oxygen-free, 99% copper wires surpass any other brand for sound reproduction. If you are like me, and are seeking as near as possible for perfection, this is a good place to start. You can try and save money by using some less expensive wire, but eventually you will end up getting the Dayton SKRL brand anyways. I gave it 4 stars instead of 5, not due to its performance, because its performance remains unsurpassed, but because lately Dayton wires come with writing so pale that it requires a magnifying glass to be able to read it.Cheers, Ben
Date published: 2013-09-13
Rated 5 out of 5 by from Fantastic Product - Best 10 AWG Wire on the MarketI have been searching the Internet for months upon months trying to find the most cost effective, oxygen free 10 AWG speaker wire to power my B&W Speakers. This has been a great fine, the speaker wire is easy to work with due to its multi-strand construction, high quality build and feel, and delivers premium performance in my home theater system without significant -dB loss. Highly recommended product!!!
Date published: 2013-03-04
Rated 5 out of 5 by from Dayton Audio SKRL-10-100 10 AWG OFC Speaker Wire 100ft.I was completely amazed!I had my speakers setup with old monster cable wire I found in my house. It was a little green and oxidized, but I used a razor to clean the it all off and after I was finished, it was decent and worked. I bought this cable to use on the rears that just came in, and after measuring I would have enough for the fronts too. I replaced the fronts and just turned on my receiver to listen if I could hear a difference. The hissing that it once produced when the speakers were not being used has almost ceased entirely, and the quality of sound has increased dramatically. Truly a worthy purchase... I couldn't believe it...
Date published: 2013-02-07
Rated 5 out of 5 by from Excellent speaker wireI looked at lots of others that seemed not to be what they were claimed, such as: 12AWG looked like 16 AWG and wire was much shorter than specified. This wire is 12AWG OFC and works great. I think I got my 100' worth too!
Date published: 2010-03-31
Rated 5 out of 5 by from Great Cable at a Terrific priceJust recently purchased a 5.1 Home theater and needed a good quality cable at an affordable cost. I exceeded both with this purchase from Parts Express. Painless service with quick shipping!
Date published: 2009-11-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft.

Are the wires marked + & -?

Asked by: Robe
There are two identifying features on this wire for polarity identification. One of the two conductors has printing on it and a ridge that you can feel when you run your finger across it.
Answered by: PE Tom
Date published: 2014-04-22

Will the 10awg fit into a Neutrik NP2RX 1/4" Mono Plug Right Angle plug?

Asked by: paprzy
Unfortunately no, this cable connector only accepts smaller gauge signal type wire. The 10 AWG Dayton cable is 3/8" wide.
Answered by: MattP
Date published: 2013-02-12

What is the matel used in the Dayton 10 awg Audio speaker wire?

The material is not stated. I know some wire use AL, or copper alloys.
Asked by: Rickr
This speaker wire is constructed of Oxygen Free Copper (OFC).
Answered by: RussR
Date published: 2012-11-26

Customer Projects

Customer projects that include: Wired Home SKRL-10-100 10 AWG OFC Speaker Wire 100 ft.

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1