Wired Home HDMI-WP1 Single HDMI Wall Plate

Brand:| Model: HDMI-WP1
HDMI wall plates from Wired Home maintain HDMI signal integrity and allow you to conceal your HDMI cables in-wall.
  • Decora┬« compatible insert and styling
  • In-wall strain relief cable
  • Single-gang design
  • Passes 1080p, HDMI v1.3 compliant
Part # 
Weight: 0.25 lbs.  
List Price$24.99
You Save33%
Your Price
Buy 4-up$15.88
Part # 300-622
Qty:  EA
Available Payment Methods

Product Details

Wired Home HDMI-WP1 Single HDMI Wall Plate
HDMI wall plates from Wired Home maintain HDMI signal integrity and allow you to conceal your HDMI cables in-wall. A mini, in-wall, strain relief cable reduces cable tension by taking the weight of the cable off of the connector and increases connection reliability. Modern Decora® styling matches other wall plates used throughout the home for seamless integration into your dÉcor.

Wired Home HDMI-WP1 Single HDMI Wall Plate
  • BrandWired Home
  • ModelHDMI-WP1
  • Part Number300-622
  • UPC844632064562
  • Product CategoryHDMI Wall Plates
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.25 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Wired Home HDMI-WP1 Single HDMI Wall Plate
in the HDMI Wall Plates product category.


Wired Home HDMI-WP1 Single HDMI Wall Plate
Wired Home HDMI-WP1 Single HDMI Wall Plate is rated 3.6667 out of 5 by 6.
Rated 4 out of 5 by from Great item.Perfect fit. Looks great. Dayton continues to make quality products.
Date published: 2013-03-21
Rated 3 out of 5 by from Pretty GoodI like the flexible tail in contrast to the fixed 90 degree coupler of the pyle. It is difficult to get it snapped into the plate securely though. If you could combine the firmer plate and more secure connection of the pyle with this flexible tail it would be perfect. Some applications this is better, some the pyle is better. With both you would certainly want to install in an open low voltage bracket. Not sure there is any HDMI solution that would work in a closed box.
Date published: 2010-11-23
Rated 1 out of 5 by from RUN!Not sure what the previous reviewers did but I bought six of these. First one I installed was in a very awkward place so took a few minutes. When I plugged the HDMI cable in, the receptacle pushed out the back of the plate. I had to take the plate back off the wall and plug the cable into the receptacle before re-installing. Got two more out of the truck and found them all the same. Tabs that hold the female HDMI receptacle in the plate are too small. Tried the spares back at the shop and found them all the same. Threw them all away. Can't afford to use poor quality parts and burn my customers like that.
Date published: 2010-08-14
Rated 5 out of 5 by from Great WallplateLooks good and performs flawlessly, no need to look any further for this product!
Date published: 2008-12-29
Rated 4 out of 5 by from Good Value HDMI wall plateThis is a pretty good wall plate for HDMI. I didn't rate it a 5 because it is a little hard to bend the small HDMI cable behind the plate after you plug in another cable and fit it inside the box. I think I would buy the type that has a connector where the behind-the-wall cable plugs in at a right angle next time.
Date published: 2008-10-07
Rated 5 out of 5 by from Great ValueHDMI cable fit tight, clean look, and cheap. The only minor thing was the HDMI base plate could be a bit more ridged
Date published: 2007-12-29
  • 2015-03-27T06:20CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_300-622, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Wired Home HDMI-WP1 Single HDMI Wall Plate

Can the Decora insert be removed from its cover plate and installed in a 2 or 3 gang Decora plate with other Decora inserts?

Asked by: Jan Lu

Do I understand correctly that I can take me HDMI cable with two male ends and connect to this because it has a female connector?

Asked by: cabinboy
Yes, any standard HDMI cable will plug into this wall plate.
Answered by: MattP
Date published: 2014-07-08

Does this plate support the hdmi with the ethernet built in

Asked by: Kdove
Unfortunately no, this is only HDMI v1.3 compliant.
Answered by: MattP
Date published: 2014-01-13
  • 2015-03-27T06:35CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_300-622, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: Wired Home HDMI-WP1 Single HDMI Wall Plate

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software