Wet Look 4 oz. Black

Wet Look 4 oz. Black

Overview
The Wet Look™ is a new generation of high gloss polymers formulated especially for the speaker industry. This superior coating provides a protective "coat of armor" for your paper cone speakers.
Part # 
340-513
Weight: 0.35 lbs.  
IN STOCK
List Price$10.99
You Save31%
Your Price
$7.50
Buy 4-up$6.60
Part # 340-513
Qty:  EA
Available Payment Methods

Product Details

Wet Look 4 oz. Black
The Wet Look™ is a new generation of high gloss polymers formulated especially for the speaker industry. This superior coating provides a protective "coat of armor" for your paper cone speakers. A special U/V inhibitor has been added to reduce the decaying effects of the sun's ultraviolet rays. The Wet Look™ makes paper cones resistant to water, humidity, sun, and salt. Best of all, it's easy to apply and cleans up with soap and water. 4 oz. plastic bottle.


Wet Look 4 oz. Black
  • BrandParts Express
  • Part Number340-513
  • UPC844632080401
  • Product CategorySpray Adhesive & Glue
  • Unit of MeasureEA
  • Product Rating
    (3 Reviews)
  • Weight0.35 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Wet Look 4 oz. Black
in the Spray Adhesive & Glue product category.

Reviews

Wet Look 4 oz. Black
Wet Look 4 oz. Black is rated 4.6667 out of 5 by 3.
Rated 5 out of 5 by from Makes old look new!I had some older Dayton 5" midwoofers I use in a garage system that had become very greyish and worn looking. I purchased the product based on other reviews and it realy works. I was initially worried about brush strokes but the product seemed to self level. Looks absolutely great, smooth, shiny and seemed to stiffen the cone.Buy it you will not be dissappointed.
Date published: 2012-10-04
Rated 4 out of 5 by from Saved the look of my speakersEasy to apply! Does go on smoth, but leaves some brush strokes. Might have been better if sprayed on as they suggest. Left the cones looking new and feeling protected as it gives the cones almost like a poly coating. Put 4 coats on them and still have over 3/4 bottle left. (Coated two 6" spkrs)Been wanting to try this product for years now, and finally did and am happy with how the project turned out.
Date published: 2012-02-12
Rated 5 out of 5 by from This stuff is simply amazing. 5*****I had seen some reviews with people complaining about it looking like water down glue etc. I wasn't expecting much, But when I opened it and started applying I was blown away with how well it covered the cone, How smooth it went on, and how fast it dried and finally how it totally changed the look of my speakers. they went from a old worn grey looking paper to a shiny black new looking cones. I may be overexcited but I swear it stiffened the cones up dramatically and has caused the speakers to sound dramatically better.I ordered a 4 oz bottle and after 4 coats on each 15" speaker I still have 1/3 of bottle left so it covers a lot of area.
Date published: 2010-07-05

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Wet Look 4 oz. Black

is it safe on polyprpylene and Butyl??

will this product be safe to use on Polypropylene andButyl rubber??
Asked by: lytro96
It would be safe although this is generally only used on materials that are porous. We also to not recommend this for surrounds because it does not stay flexible enough to prevent changing driver parameters.
Answered by: MattP
Date published: 2013-12-18

can this be used on a H.O.P. (Highly Oriented Polyolefine) cone speakers

sony makes them
Asked by: Swilk G
According the the product definition from Sony: "H.O.P. is 30 times stronger than regular polypropylene, so you know these speakers can really dish out the mids and lows. The durable rubber surround resists deterioration from heat and humidity."It seems that there would be no point for using the Wet Look, because the speaker cones that are made from are very glossy, and I doubt that the Wet is nearly as strong in the first place. I used the Wet Look on some older paper cone woofers, it is a great product, a real money saver, and performance enhancer, but like any great product, it has it's proper use, but it is just not needed here.
Answered by: scottasbj
Date published: 2013-12-18

is this applied to the surround and the dust cap?

Asked by: Swilk G
This product is designed to be applied to paper cones. If your surround(s) and/or dust cap(s) are paper, then it should be fine. If they're some other material, I cannot say that this product would be suitable for the application.
Answered by: RussR
Date published: 2013-12-18

Can this be used on the butyl rubber surround of a woorfer?

Asked by: scottasbj
It is formulated specifically for paper cones, but should be fine for butyl rubber. I would recommend spot-testing prior to application, just to be on the safe side.
Answered by: RussR
Date published: 2013-12-18

Customer Projects

Customer projects that include: Wet Look 4 oz. Black

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Wet Look 4 oz. Black
Part # 340-513

Customers Also Bought

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1