Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Waterproof AGU Fuse Holder
What is the method for connecting the wire to the Part # 070-660 fuse holder? Crimp or solder?
This is a set screw type connection.
Date published: 2015-09-22
I'm wiring up my boss riot series R3002 amplifier soon. When i use a fuse holder like this, do i need to match the fuse rating with the fuse rating for the amp?
Date published: 2014-12-31
I'm finally getting around to my Sub installation and see there are o-ring seals at the threads on the body but not at the ends where the wire enters the fuse holder. This means no water seal AND no pressure squeezing the fuse. Should there be seals? Thx
This fuse holder does not have seals where the wire enters the holder. You can use heat shrink for this if it is a concern, but as long as water isn't entering the fuse compartment there won't be any issues.
Date published: 2014-11-25
The description states, "Recommended use up to 60 amps". Can this product be used with 80 amp fuses?
If the fuseholder is only rated to 60 amps I would not recommend using anything more.
Date published: 2013-01-02