Wafer Fuse Holder

Wafer Fuse Holder

Wafer fuseholder features quality construction and gold plated contacts for maximum power transfer.
Part # 
Weight: 0.2862 lbs.  
Your Price
Buy 4-up$4.51
Part # 263-630
Qty:  EA
Available Payment Methods

Product Details

Wafer Fuse Holder
Wafer fuseholder features quality construction and gold plated contacts for maximum power transfer. Clear plasitic case with integrated mounting tabs. Uses ANL wafer fuses up to 300 amps. 5/16" ring terminal posts. 3/4" opening in each end is large enough to accept 1/0 ga. wire. 4-7/8" L x 1-1/2" W x 1-1/2" H.

Wafer Fuse Holder
  • BrandParts Express
  • Part Number263-630
  • UPC844632017667
  • Product CategoryAutomotive Fuse Holders
  • Unit of MeasureEA
  • Product Rating
    (14 Reviews)
  • Weight0.2862 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Wafer Fuse Holder
in the Automotive Fuse Holders product category.


Wafer Fuse Holder
Wafer Fuse Holder is rated 4.7857 out of 5 by 14.
Rated 5 out of 5 by from Bang for your buckProduct came in handy for rewiring the battery connections and engine grounds on my old my old Cherokee. I used it to replace the fusible link between the alternator and starter solenoid. Would also be useful in car audio applications.
Date published: 2013-09-09
Rated 5 out of 5 by from Cheap prize, good qualityUse this fuse holder to wire my 130 amp alternator. No issues what so ever.
Date published: 2012-07-18
Rated 5 out of 5 by from High-Quality Fuse HolderHigh-quality clear acrylic. Wafer-type fuses fit exactly without having to force them in. Threaded terminal posts are molded tightly into acrylic plastic. No worry about them spinning while you're tightening down on the nuts. (...of course, it's an electrical connection - not structural - so only modest tightening force is req'd). There's a semi-circular clear acrylic cover which snaps securely to the base. It's intention is to protect from accidental short-circuit. If you're looking for weather-proofing, you'll have to get creative somehow. Nice, heavy-duty product if you need to add fused protection to high-amperage pulling devices.
Date published: 2012-01-09
Rated 5 out of 5 by from does the same thing even if it cost $50Very inexpensive fuse holders but far from "cheap." These fuse holders perform the same as any other brand out there for this type of fuse holder. When you need a bunch of them they can get pretty steep with other brands, but these don't hurt the wallet, still look great and very sturdy.
Date published: 2010-01-19
Rated 4 out of 5 by from ORDER RING TERMINALSIt is only two posts but still a great value due to the fact that my local audio stores charge in excess of 20 for these.
Date published: 2009-11-10
Rated 4 out of 5 by from Look before you buy!Very simple design - two gold posts embedded into a clear plastic housing and a snap on cover. Don't be suckered like I was when I saw such a great deal. You also need to buy ring terminals to use with this fuse holder which brings the cost of using this holder a little more.
Date published: 2009-08-30
  • 2015-05-04T06:55CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_263-630, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Wafer Fuse Holder

Customer Projects

Customer projects that include: Wafer Fuse Holder

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Wafer Fuse Holder
Part # 263-630

Customers Also Bought

60A Gold Plated Wafer Fuse
Part # 071-959
150A Gold Plated Wafer Fuse
Part # 071-952
100A Gold Plated Wafer Fuse
Part # 071-950
4-8 AWG Distribution Block
Part # 265-800
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software