free shipping at parts express

Manuals & Resources

Visaton M 10 4" Sealed Back Cone Midrange Driver 8 Ohm

Brand:|Model: M 10|Part # 292-594
Visaton's M 10 sealed back 4" midrange is designed for critical midrange reproduction without the need for an enclosure.
In Stock
List Price$20.67
You Save25%
Your Price
Buy 4+$14.13
Part # 292-594
  • Paper cone and dustcap with cloth accordion surround
  • Natural vocal reproduction
  • Handles up to 80 watts RMS with 12 dB, 800 Hz high pass filter
  • Closed back design, requires no enclosure

Product Details

Visaton M 10 4" Sealed Back Cone Midrange Driver 8 Ohm

Designed for reproducing the human voice, Visaton's M 10 midrange speaker has very linear response from 1,000 to 5,000 Hz. The closed back frame design eliminates the need for a housing, making it a great drop-in replacement in three way cabinets without a separate enclosure for a mid, where a larger woofer could otherwise hurt the performance of a conventional midrange.

High sensitivity and power handling combine for more output than other midrange drivers, while the paper cone and cloth accordion surround create a more natural, classic sound that is pleasing to most peoples' ears. A steel mounting plate eliminates the need for a baffle recess.

Product Specifications
  • Nominal Diameter4"
  • Power Handling (RMS)80 Watts
  • Power Handling (max)100 Watts
  • Impedance8 ohms
  • Frequency Response450 to 13,000 Hz
  • Sensitivity90 dB 1W/1m
  • Voice Coil Diameter0.79"
Thiele-Small Parameters
  • Resonant Frequency (Fs)700 Hz
  • Maximum Linear Excursion (Xmax)1.5 mm
Materials of Construction
  • Cone MaterialPaper
  • Surround MaterialCloth
  • Basket / Frame MaterialSteel
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside DiameterSquare 4.01" x 4.01"
  • Baffle Cutout Diameter3.7"
  • Depth1.53"
  • Bolt Circle Diameter4.6"
  • # Mounting Holes4
Visaton M 10 4" Sealed Back Cone Midrange Driver 8 Ohm
  • BrandVisaton
  • ModelM 10
  • Part Number292-594
  • UPC4007540090894
  • Product CategoryMidrange / Midbass Drivers & Full-Range Speakers
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight0.73 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Visaton M 10 4" Sealed Back Cone Midrange Driver 8 Ohm
in the Midrange / Midbass Drivers & Full-Range Speakers product category.


Visaton M 10 4" Sealed Back Cone Midrange Driver 8 Ohm
Visaton M 10 4" Sealed Back Cone Midrange Driver 8 Ohm is rated 3.6 out of 5 by 5.
Rated 5 out of 5 by from Well built great qualityBought a pair to replace the midranges in a pair of Yamaha monitors. Definite improvement over the original drivers.
Date published: 2015-07-21
Rated 5 out of 5 by from Excellent speaker for a 3 way systemI actually used this speaker for a custom guitar amplifier build.The crossover has a selector switch, so you can run just the 12" or switch in the Mid, tweeter or both. Really adds a nice high freq boost if desired. See d-lab amps on internet land. Parts express has some real good deals on speakers and shipping is quick! I have dealt with them for over 20 years.
Date published: 2014-06-29
Rated 2 out of 5 by from Fit the bill.These are a copy of a speaker that has been around for 20 years. They are border line worth the money. Don't expect nice sound but are a decent replacement for certain low level speaker cabinets.
Date published: 2014-04-28
Rated 5 out of 5 by from Outstanding Frequency ResponseExcellent sound with a better than original equipment manufacturers result.
Date published: 2014-03-23
Rated 1 out of 5 by from speaker blew out after a few minutes on low powerTried to use this speaker on low power with and onkyo receiver. It heated up and quit after a few minutes.
Date published: 2014-01-24
  • 2016-02-14T06:46CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_292-594, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Visaton M 10 4" Sealed Back Cone Midrange Driver 8 Ohm

What is the difference between Baffle Cutout Diameter and Bolt Circle Diameter? I'm trying to figure out if this will fit my speaker box.

Asked by: GregIsNow
The baffle cutout is the diameter of the hole that this speaker mounts into in the enclosure. The bolt circle diameter is the distance diagonally between the screw holes.
Answered by: MattP
Date published: 2015-08-31

Will this fit in my pair of Fisher tower speakers?

Asked by: zack50
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-02-05

will this midrange mount on top of the baffle or inside the baffle

Asked by: hook
This will mount either way, but a front mount will be easiest.
Answered by: MattP
Date published: 2014-10-09

Can a capacitor be recommended for this driver? 1uF maybe? Thanks

Asked by: Tomane
The capacitor value is determined by the desired crossover frequency. A 1 uF cap will cross this over very high, likely beyond its useable frequency range. If you want to protect it from bass frequencies, something like 30-40 uF will work well.
Answered by: MattP
Date published: 2014-07-02
  • 2016-02-14T07:58CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_292-594, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software