Visaton FR13-4 5" Full-Range Speaker 4 Ohm

Brand:|Model: FR13-4
Visaton's 4800 FR13 full-range 5" dual-cone speaker offers great frequency response and sensitivity in a compact package. Great for point-source, single-driver speakers. 4-ohm impedance.
Due In: 1/5/2016
Your Price
Buy 4+$12.49
Part # 292-518
  • 65 to 20,000 Hz frequency response
  • Dual-cone design is naturally time-aligned
  • Perfect for car audio and open-baffle speakers

Product Details

Visaton FR13-4 5" Full-Range Speaker 4 Ohm

The 4800 FR13 full-range speaker from Visaton provides uniform frequency response and a surprising amount of low-frequency output. The 1.25 Qts motor is designed to offer decent bass response when used in infinite baffle applications, such as automotive car door speakers, overhead public transportation systems, and is perfect for use in open baffle speakers. The dual-cone design offers seamless time alignment when compared to multi-way speakers, and simple installation is enabled by four open mounting tangs.

Product Specifications
  • Nominal Diameter5"
  • Power Handling (RMS)25 Watts
  • Power Handling (max)50 Watts
  • Impedance4 ohms
  • Frequency Response65-20,000 Hz
  • Sensitivity88 dB 1W/1m
  • Voice Coil Diameter0.78"
Thiele-Small Parameters
  • Resonant Frequency (Fs)100 Hz
  • DC Resistance (Re)3.40 ohms
  • Voice Coil Inductance (Le)0.20 mH
  • Mechanical Q (Qms)5.17
  • Electromagnetic Q (Qes)1.64
  • Total Q (Qts)1.25
  • Compliance Equivalent Volume (Vas)0.22 ft.³
  • BL Product (BL)2.3 Tm
  • Diaphragm Mass Inc. Airload (Mms)4.5g
  • Maximum Linear Excursion (Xmax)2.5 mm
  • Surface Area of Cone (Sd)87 cm²
Materials of Construction
  • Cone MaterialPaper
  • Surround MaterialFoam
  • Voice Coil Wire MaterialCopper
  • Basket / Frame MaterialSteel
  • Magnet MaterialFerrite
Mounting Information
  • Overall Outside Diameter5.86" (mounting tabs), 5.07"
  • Baffle Cutout Diameter4.57"
  • Depth1.69"
  • # Mounting Holes4
Visaton FR13-4 5" Full-Range Speaker 4 Ohm
  • BrandVisaton
  • ModelFR13-4
  • Part Number292-518
  • UPC040075400480
  • Product CategoryMidrange / Midbass Drivers & Full-Range Speakers
  • Unit of MeasureEA
  • Product Rating
    (10 Reviews)
  • Weight0.7 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Visaton FR13-4 5" Full-Range Speaker 4 Ohm
in the Midrange / Midbass Drivers & Full-Range Speakers product category.


Visaton FR13-4 5" Full-Range Speaker 4 Ohm
Visaton FR13-4 5" Full-Range Speaker 4 Ohm is rated 4.5 out of 5 by 10.
Rated 5 out of 5 by from speakerThis just what I ordered, appears to be a good quality speaker.
Date published: 2015-03-02
Rated 2 out of 5 by from Tinny soundThey are ok. I wish I spent a few more bucks and got something fuller in sound.
Date published: 2015-02-28
Rated 5 out of 5 by from Follow Up, with pic this time.This is just a follow up of my previous review. Simply amazing little speakers! Can't say enough about them. They barely look usable as an alarm clock radio speaker. But to hear them is quite surprising. Anyway, I attached a picture of my rough OB project with these. Any comments/criticisms/question are welcome. Looking forward to building a more complex and finished design in the near future for these. I am thinking that they may actually be suitable as the high range in a Martin J. King OB design instead of the Fostex. most likely accompanied by the infamous Eminence 15A.
Date published: 2014-09-25
Rated 4 out of 5 by from Open Baffle ProjectThought this little driver had good specs for OB design, and it does. While it is just a frogs hair muted on the top end, it is quite pleasant as a full range. Certainly not ready to throw a tweeter in the mix. Bass response is surprising, even in OB. But I shouldn't be that surprised with the higher Qts rating. Perhaps a break-in period will render a slightly fuller response on high end freq. If I remember, I will review it again, perhaps with the addition of a star. I just don't know enough yet for the 5th star.I have both drivers installed in a single baffle board with middle brace, just made it with scraps. It's not pretty, and certainly not a finished product. But this is one of my first, and so far it's been fun. One day, I will build something much more advanced. But want to get the idea down first before I spend a bunch of money.Good driver for this project. Look forward to listening more.
Date published: 2014-09-09
Rated 5 out of 5 by from ImpressedBought a pair of these speakers recently and have them on small baffles 24 x 18 ". Playing about a month now, sound is very nicely balanced and integrated with detail and bass that won't shake the house, but enough there to support most of the music I listen to. Example is on Eddie Cochran - Somethin' Else (hits) Guybo's bass is easily there. I drive them with a 5 watt solid state class A amp I built. These have a very pleasing sound and are affordable.
Date published: 2014-05-03
Rated 5 out of 5 by from Great open baffle designI'm installing a sound system for a friend who owns a local bar, and we decided on a wall mounted open baffle design, the bottom of the baffle is angled down 30 degrees with two "wings" on each side at 45 degree angles from the front baffle, no parallel sides, mounted directly to the wall with two subwoofers for low end extension, and these drivers work amazingly, great low end for open baffle, especially for such a small open baffle, and amazingly natural sounding. She has three installed in the main bar area and one installed in the back room and loves to play them pretty loudly, great affordable sound system.
Date published: 2014-04-07
  • 2015-11-26T06:38CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_292-518, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Visaton FR13-4 5" Full-Range Speaker 4 Ohm

hi i have g jvc boombox bodel no. RC-555WH and the Impedance is 3.2 at 2.5w will thees be all rite or will the output be to low or to high 

Asked by: Zander
Please contact our tech support for more help with this question, or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-10-08

Has German technology beat or at least improved the "foam to dust" cone surround problem? The Visaton line is of interest. Many thanks, Karl

Asked by: Karl Atkeson
By nature all foam surrounds will eventually succumb to dry rot. The surrounds these days are treated better and last longer, however.
Answered by: MattP
Date published: 2015-09-10

for ported application, what volume and port design do you guys suggest?  

Asked by: pasley
Porting this speaker will result in very peaky bass response and a relatively large volume or about 0.45 cubic feet. A 2" diameter hole in the enclosure will result in a tuning frequency of 85 Hz, but there will not be much audible below about 120 Hz due to a large peak. Sticking with a sealed design will result in smoother bass response.
Answered by: MattP
Date published: 2015-07-16

How many speakers come inside the box? Also im planning on using these to make a bluetooth speaker. The instructions i'm using are in this link. would these work for this?

Asked by: Fleet Foxes
These are sold individually and would work for that type of Bluetooth speaker.
Answered by: MattP
Date published: 2014-10-17

Will these work as replacement for Galaxy Hot Spot speakers? Mine is a little powered 30 watt.

Asked by: jimmy acoustic
The bolt holes will match up but these will not produce the same amount of output or handle the same amount of power as the Galaxy drivers. For low volumes they will work okay, but you might also need to add some sort of gaskets to create an air tight seal on the baffle.
Answered by: MattP
Date published: 2014-10-13

Recommended Enclosure size and HT use

What would be the recommended enclosure type and size? Would you need some type of crossover in the cabinet? Also, could this be used in a cheap HT setup in a small apartment so long as a subwoofer is also used?
Asked by: billiam62
This driver can be used in a .2 cubic foot sealed box in your application without any crossover needed. The subwoofer will handle the lower frequencies so this would just be responsible for mid/high.
Answered by: Chrisf
Date published: 2013-02-15
  • 2015-11-26T07:21CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_292-518, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Get Sales Flyer
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software