free shipping at parts express

Tymphany BC25SC06-04 1" Textile Dome Tweeter

Brand:|Model: BC25SC06-04|Part # 264-1028
The BC25 SC06-04 from Tymphany (formerly Vifa) is a smooth-sounding compact soft dome tweeter. Extremely efficient for it's size, this tweeter features a neodymium motor, heatsink fins, and round faceplate.
In Stock
List Price$22.99
You Save31%
Your Price
Buy 4+$14.29
Part # 264-1028
  • Round polymer faceplate with recessed waveguide loading
  • 1" treated soft dome
  • Neodymium magnet for high output and compact size
  • Rear heatsink improves thermal management
  • Smooth frequency response extends past 20 kHz

Product Details

Tymphany BC25SC06-04 1" Textile Dome Tweeter

Smooth-sounding compact soft dome tweeter with high output and response past 20 kHz. Neodymium motor, heatsink fins, and round faceplate. .

Product Specifications
  • Tweeter TypeSoft Dome
  • Cone / Dome Diameter1"
  • Impedance4 ohms
  • Power Handling (RMS)50 Watts
  • Frequency Response1,350 to 30,000 Hz
  • Sensitivity96 dB 1W/1m
Thiele-Small Parameters
  • Resonant Frequency (Fs)1,350 Hz
  • DC Resistance (Re)2.9 ohms
  • Mechanical Q (Qms)2.80
  • Electromagnetic Q (Qes)2.30
  • Total Q (Qts)1.26
Mounting Information
  • Overall Outside Diameter2.75"
  • Cutout Diameter1.70"
  • Depth1.25"
Tymphany BC25SC06-04 1" Textile Dome Tweeter
  • BrandPeerless by Tymphany
  • ModelBC25SC06-04
  • Part Number264-1028
  • UPC844632083754
  • Product CategoryTweeters
  • Unit of MeasureEA
  • Product Rating
    (51 Reviews)
  • Weight0.15 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Tymphany BC25SC06-04 1" Textile Dome Tweeter
in the Tweeters product category.


Tymphany BC25SC06-04 1" Textile Dome Tweeter
Tymphany BC25SC06-04 1" Textile Dome Tweeter is rated 4.902 out of 5 by 51.
Rated 5 out of 5 by from Very Good Dome TweeterI am using these in a line array, 4 per side, with 6, 5.50", metal cone mids per side. These tweeters sound very smooth and cross over very well at 3000 hz, second order. The output is really clean, detailed, and fast- these are excellent when used in a line array situation.
Date published: 2015-12-23
Rated 5 out of 5 by from Great soundI replaced the damaged tweeters in a pair of M-Audio DX4 monitors with these. The sound is superb. Razor sharp, crystal clear highs. A great value.
Date published: 2015-03-22
Rated 5 out of 5 by from extremely smooth, powerful, and low thdI have become accustomed to ribbon tweeters for the past several years. The much lower THD and comparable frequency response has won me over to domes again! This is the best tweeter I've tested / listened to yet. Will attach graphs shortly.
Date published: 2015-03-01
Rated 5 out of 5 by from Great SoundI bought these Vifa to produce a good clear sound for dialogue when watching movies on my HD TV and they work great, now i get clear crisp dialogue and coupled with my other speakers i now have a great system. Parts Express is a great place to buy from with the best customer service in the industry. If you have any questions or problems they will be answered and they are very professional and always follow up with problems or questions. I highly recommend Parts Express as a place to buy quality products with great customer service.
Date published: 2014-11-19
Rated 5 out of 5 by from Saved my PSB speakersI have had 5.1 surround PSB speakers for years and always thought my center channel lacked sound so I would always set my surround to 5 speaker mode essentially shutting off surround. Recently after I replaced my receiver, I realized my center channel tweeter was bad. I was able to swap the tweeter from my left speaker to the center and the sound was fixed. Replacement PSB tweeters were $50 so this seemed like the best option. I replaced all tweeters to keep the speakers matching and I could not be happier. I finally appreciate my surround after so many years. These sound great. I added the 1.8 Ohm 10W Resistor Wire Wound 5% Tolerance resistor from parts express as well so to match the impedance of the old tweeter. I wish I did it years ago!
Date published: 2014-10-22
Rated 5 out of 5 by from Great little tweeter!I just purchased these to replace the original tweeter in my PSB Image 5T tower. It was a direct fit, same dimensions as the original. Two things worth mentioning: 1st, in my opinion the tweeter was really bright. It made vocals go up an octave or two. Male vocals were definitely at a higher pitch (or tone). 2nd, the faceplate on this tweeter is flat. The PSB tweeter has a convex surface that matches the contour of the speaker. It's just a cosmetic thing I know, but the Vifa tweeter does fit the cut-out perfectly. I ended up swapping the tweeters from my 2B bookshelf speakers to the 5t's and will get another Vifa tweeter for the 2B's.
Date published: 2014-10-20
  • 2016-04-29T06:37CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_51
  • loc_en_US, sid_264-1028, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Tymphany BC25SC06-04 1" Textile Dome Tweeter

will this tweeter be a good replacement for my miccas 42x?

Asked by: roberto54
For assistance on specific speaker replacements please contact our technical department directly at 800-338-0531 or by email at Some additional measurements are generally necessary to ensure a proper fit.
Answered by: Chrisf
Date published: 2016-04-26

Which post is positive?

Asked by: dem0967
One of the terminals should be marked with a red marker, this will be positive. In the picture showing the back of the tweeter, the terminal on the left side is positive.
Answered by: MattP
Date published: 2016-03-29

The face waveguide piece looks removable,  is it ? I'm trying to squeeze this in a tight dash location. 

Asked by: Jaycee
We do not recommend attempting to remove the faceplate. The manufacturers use adhesives sometimes.
Answered by: Chrisf
Date published: 2016-02-23

Would these be a good substitute for the Dayton ND20FA in an Overnight Sensation build? (I assume some crossover tweeks would be needed?)

Asked by: Downtown
Yes the crossovers would need to be addressed and changed but I see no reason these will not work with those woofers.
Answered by: MattP
Date published: 2016-01-21

Can I, using active 4th order filtering, XO these @ or below 2Khz?

Asked by: 975 Destroyer
I would not recommend crossing this tweeter that low.
Answered by: MattP
Date published: 2016-01-14

would these work in polk audio monitor 30 series II bookshelf speakers, if not do you have a recommendation?

Asked by: howbob
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-12-15
  • 2016-04-29T07:18CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_31
  • loc_en_US, sid_264-1028, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software