Tang Band W0-2008S 1" Neodymium Full Range Driver Pair

Brand:| Model: W0-2008S
Modern speaker designs and applications call for drivers that are exceptionally small. Traditionally, the sacrifice when using small drivers is performance. Tang Band's 18.4 mm W0-2008S full range drivers play from 280 Hz all the way up to 20,000 Hz without losing fidelity! Sold in pairs.
  • Amazing extended range response from 280 to 20,000 Hz
  • Perfect for line-arrays and modern speaker designs
  • Super low inductance and ferrofluid cooled
  • Low Qts driver for high fidelity performance
  • Sold in pairs
Part # 
Weight: 0.05 lbs.  
List Price$24.99
You Save33%
Your Price
Buy 4-up$15.80
Part # 264-921
Qty:  EA
Available Payment Methods

Product Details

Tang Band W0-2008S 1" Neodymium Full Range Driver Pair

Tang Band's W0-2008S micro full-range drivers feature amazing performance that belies their diminutive 18.4 mm diameter (under 3/4") size. The patented design uses a unique polypropylene cone, with flower petal embossments, that's mated to a neodymium motor for maximum BL product in the voice coil gap. A free air resonance of 280 Hz allows you to pair these nearly any woofer or subwoofer up to 4 feet away without localization and beaming effects (poor off-axis response).

Additionally, you can use these drivers in multiples for an awesome line-array speaker that requires a miniscule footprint. Great for use in designing micro LCR (left, center, right) speakers for modern flat panel HDTVs, or even computer desk and laptop speakers. The high-fidelity nature of these drivers is exemplified by their low Qts specification (quite rare in drivers this size), while the ultra-low inductance allows these to play relatively flat frequency response up 20,000 Hz! Ferrofluid cooling protects and cools the voice coil, while the mineral-filled polypropylene cone combines with the Santoprene surround for use in harsh environments. Sold in pairs.

Note: Higher power handling can be achieved by using a 300 Hz 2nd-order high-pass filter, or by using multiple drivers together.

Product Specifications
  • Nominal Diameter1"
  • Power Handling (RMS)1 Watts
  • Power Handling (max)2 Watts
  • Impedance4 ohms
  • Frequency Response280 to 20,000 Hz
  • Sensitivity73 dB 1W/1m
  • Voice Coil Diameter0.46"
Thiele-Small Parameters
  • Resonant Frequency (Fs)280 Hz
  • DC Resistance (Re)3.6 ohms
  • Voice Coil Inductance (Le)0.007 mH
  • Mechanical Q (Qms)1.17
  • Electromagnetic Q (Qes)0.86
  • Total Q (Qts)0.5
  • Mechanical Compliance of Suspension (Cms)2.66 mm/N
  • BL Product (BL)0.99 Tm
  • Diaphragm Mass Inc. Airload (Mms)0.15g
  • Surface Area of Cone (Sd)1.4 cm²
Materials of Construction
  • Cone MaterialPoly
  • Magnet MaterialNeodymium
Mounting Information
  • Overall Outside Diameter0.72"
  • Baffle Cutout Diameter0.58"
  • Depth0.28"
Tang Band W0-2008S 1" Neodymium Full Range Driver Pair
  • BrandTang Band
  • ModelW0-2008S
  • Part Number264-921
  • UPC844632099397
  • Product CategoryMidrange / Midbass Drivers & Full-Range Speakers
  • Unit of MeasureEA
  • Weight0.05 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Tang Band W0-2008S 1" Neodymium Full Range Driver Pair
in the Midrange / Midbass Drivers & Full-Range Speakers product category.


Tang Band W0-2008S 1" Neodymium Full Range Driver Pair

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Tang Band W0-2008S 1" Neodymium Full Range Driver Pair


Could these work in a headphone design?
Asked by: Macoustics
Technically yes although the low impedance might cause issues with some headphone amplifiers.
Answered by: MattP
Date published: 2013-05-31

Can you leave the Dayton Audio IO650W 6 1/2" indoor/outdoor speakers outside year round?

In the summertime, like today, it's 108 degrees and in the winter we've had ice storms that have left us w/out electricity for 2 to 3 weeks. So kind of from one extreme to the other.
Asked by: Lollie
Yes, these are designed to be installed outdoors; however, it is recommended that they be mounted under an awning or soffit (not in direct contact with rain or sun).
Answered by: RussR
Date published: 2012-07-31

Customer Projects

Customer projects that include: Tang Band W0-2008S 1" Neodymium Full Range Driver Pair

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA

© 1996-2014 Parts Express, All Rights Reserved

Live Chat Software