Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter

Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter

Brand:| Model: 28-537SH
Overview
1-1/8" coated fabric dome tweeter features a shallow-depth resonance-lowering back chamber and a shorting ring for reduced 2nd and 3rd harmonic distortion.
Part # 
264-870
Weight: 2.05 lbs.  
ORDER TODAY
Ships in 60-90 days, minimum order quantity 300 pcs.
List Price$39.68
Part # 264-870
Qty:  EA
Call For Pricing 
844-349-4445 (Toll Free)
Available Payment Methods

Product Details

Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter

1-1/8" coated fabric dome tweeter features a shallow-depth resonance-lowering back chamber and a shorting ring for reduced 2nd and 3rd harmonic distortion. Extremely smooth response thanks to high-loss diaphragm material. Highly efficient neodymium motor and ferrofluid-cooled voice coil. Three-hole aluminum faceplate.



Product Specifications
  • Tweeter TypeSoft Dome
  • Cone / Dome Diameter1-1/8"
  • Impedance8 ohms
  • Power Handling (RMS)12 Watts
  • Frequency Response900 to 20,000 Hz
  • Sensitivity91 dB 1W/1m
Thiele-Small Parameters
  • Resonant Frequency (Fs)900 Hz
  • DC Resistance (Re)6.00 ohms
Mounting Information
  • Overall Outside Diameter4.33"
  • Cutout Diameter3.30"
  • Depth1.76"
Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter
  • BrandTang Band
  • Model28-537SH
  • Part Number264-870
  • UPC844632069529
  • Product CategoryTweeters
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight2.05 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter
in the Tweeters product category.

Reviews

Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter
Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from Superb.This offers an aluminum face plate, low resonance, low distortion and over all high end build quality. I crossed it at 1750 to the Peerless HDS 6.5" Nomex, and the tweeter is definitely the star of that show!Not very sensitive, the factory charts are off quite a ways - not good for use in an MTM for the most part.Very solid value, and unless you need to cross a little lower than 1700-1800, it doesn't give up much to most other dome tweeters out there.
Date published: 2013-09-16
Rated 5 out of 5 by from Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter - Smooth and SweetI'm not an "audio expert". But I do know what I like. To me this tweeter sounds fantastic. Music is accurate, smooth and sweet. This is a driver you can listen to for long periods of time. Build quality is top notch. You won't be sorry if you purchase this product!
Date published: 2013-01-11
Rated 5 out of 5 by from A great ferrite tweeterAre all new tweeters neo's? Nope, not these! Matched with two of the TB 6.5" under-hung mid-drivers with a 2KHz cross-over for amazing sound. They work very well with these mid-drivers and handle a lot of power. Distortion isn't noticeable even at their peak rating...sweet!
Date published: 2010-11-15
Rated 4 out of 5 by from AR-2x rebuildI used these in an AR-2x rebuild, which need a tweet with a low crossover (1.2k) Noticed that these were recommended elsewhere on the web (search for product number.) I'm very happy with the product: they image very well, are detailed without being harsh or metallic or overly strident. Very musical through my Rotel RB-980. They're an improvement over the original AR's in my opinion. The only reason I don't rate them as 5's is that I have not been able to compare them to a higher-end product.
Date published: 2009-03-24

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter

Crossover point and L-Pad

Thinking about running 2 computer monitors: this TB 1 1/8 tweeter with two Tang Band W4 mids (in series at 8 ohms). So a few questions:1) Do these woofers match well with the tweeter2) if so what would be a good crossover point3) if necessary, what kind of L-Pad would be necessary?
Asked by: Scott.Egolf2
Yes those woofers will work, Something between 2,000 and 3,000 Hz will work well and the L-pad will be based on personal preference but you will likely have to start with 3-4 dB.
Answered by: MattP
Date published: 2013-07-27

Power handling ?

What would be the power handling capabilities of this tweeter when used with a XO point 2500 LR2 ? Does the power handling go up as the XO frequency is raised ? The specs say this tweeter has shorting ring, would this make a better, lower distortion choice than say Dayton DC28-F ?
Asked by: Kidshorsesme
The RMS power rating on this tweeter is rated at full range from the manufacturer. If you cross it at 2.5kHz that will go up significantly, likely about 40-50 watts RMS. This will have lower distortion than the DC28F.
Answered by: MattP
Date published: 2013-06-27

Customer Projects

Customer projects that include: Tang Band 28-537SH 1-1/8" Fabric Dome Tweeter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software