Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
T3 Audio T57C 5" x 7" Coaxial Speaker Pair
I have 99 f 150 reg cab looking to buy 4.will they fit with minor adjustment in doors and rear pillars.thank your mike
The stock speakers in that vehicle are 6x8's, so you will need reducers in order to mount these. Unfortunately we do not have these available.
Date published: 2015-04-27
I see 4 or 5 spade connectors on the speaker, do all have to be connected or just two? Also do the speakers come with a length of wire with the appropriate female connectors on the end like most speakers do?
You only need to use two connectors. use the smaller .110 disconnect for the ground and choose between the filtered .205 or unfiltered ( no cap) .205 disconnect.
Date published: 2015-03-04
I'm looking for something to replace stock spkrs in my 2001 F-150 that do well with the factory radio. I'm going for natural sound at moderate levels. Would these be a good choice or is there another option that I should consider? Thanks
The stock speakers in that truck are 6x8, so an adapter would be required for a different size to fit properly. A Pioneer brand speaker would be a direct drop in fit and sound quite good, so you might consider something like this instead:http://www.parts-express.com/pioneer-ts-d6802r-6x8-coaxial-speaker-pair-260w--267-273
Date published: 2015-01-28
Do these come with full grills?
These do not include grills.
Date published: 2014-10-07
Will these fit in the standard door location in a 2005 Ford Ranger without modification?
The stock speakers in a Ranger are 6"x8" so these will require adapters in order to fit properly.
Date published: 2014-05-29
I have a '97 Dodge Ram 4X4 pickup with standard 6 X 9 speaker locations in the door. Will these speakers be a direct bolt in or do I need some type of adapter plate?
Anything other than a 6"x9" will require an adapter plate to fit.
Date published: 2014-01-20