263-626_ALT_0.jpg
263-626_ALT_0.jpg
 
263-626_ALT_0
 

StreetWires BC2P Battery Clamp (+) Positive

Brand:| Model: BC2P
Overview
Features two output connections for PowerRing® or other 5/16" ring terminals and one 8 AWG direct output via compression screw.
Highlights
  • Machined from forged brass
  • Super Torx™ clamping system assures connection integrity
  • Color-coded polarity indicator
  • Impact resistant cover included
Part # 
263-626
Weight: 0.36 lbs.  
IN STOCK
List Price$29.95
You Save21%
Your Price
$23.51
Part # 263-626
Qty:  EA
Available Payment Methods

Product Details

StreetWires BC2P Battery Clamp (+) Positive
StreetWires battery clamps are machined from forged brass and utilize an advanced Super Torx™ clamping system to assure connection integrity. Features two output connections for PowerRing® or other 5/16" ring terminals and one 8 AWG direct output via compression screw. Includes polarity markings and impact resistant cover.


StreetWires BC2P Battery Clamp (+) Positive
  • BrandStreetWires
  • ModelBC2P
  • Part Number263-626
  • UPC715442151394
  • Product CategoryBattery Clamps & Grounding Blocks
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.36 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the StreetWires BC2P Battery Clamp (+) Positive
in the Battery Clamps & Grounding Blocks product category.

Reviews

StreetWires BC2P Battery Clamp (+) Positive
StreetWires BC2P Battery Clamp (+) Positive is rated 4.1667 out of 5 by 6.
Rated 4 out of 5 by from Soft screwsAs with all Streetwires Battery Clamps that I have used, the screws used for the ring terminal connections are soft and will break easy if you are not careful. I always replace mine with a good grade stainless screw.
Date published: 2011-08-26
Rated 5 out of 5 by from A great battery clamp.I purchased the positive and the matching negative battery clamps and could not be any more pleased with the two. I bought both because I wanted power rings for my connections, not any cheap brass stamped crimp connectors that can loosen-up over time. Connections to the battery are tight and they dress-up the engine bay in my vehicle.
Date published: 2009-04-26
Rated 5 out of 5 by from This thing rocks!Wow. I looked around for like two days to find a battery terminal that offered a true 0/1 GA connection. Most terminals out there that do offer that kind of connection are huge and gawdy. This terminal is small, strong and has outstanding functionality. I had no problems at all. The screws that come with it are plated and perfectly sized for 5/16" ring terminals.I hooked up a kicker 0/1 GA hyperflex wire terminal and replaced my old copper factory engine POS terminal with the matching streetwires 0/1 GA Ring Terminals. Sweet! They also come with these hard plastic clip on covers that are pretty dang bullet proof. They fit snug and do well to protect the terminal. The only word of caution, is to be careful when taking them on and off becasue they have these tiny teeth inside that help keep the cover from sliding. I beasted the thing off before i figured out the trick, and brokee two of the teeth. It still fits perfectly anyway though. Did I mention that you can't find these any where else on the net! I bought this one and the BC1N for my negative battery terminal. Long story short, this thing rocks!
Date published: 2008-09-21
Rated 3 out of 5 by from Great looking battery terminalGreat battery terminal for ring connectors. If you need a lot of individual connectors to your battery terminals, look elsewhere. This unit can only accommodate two ring terminals and one 8 AWG bare cable.
Date published: 2008-08-27
Rated 4 out of 5 by from really nice product, except for allen head boltsI have these on both pos and neg terminals. I use 1/0 gauge wires for my connections, and the "big 3" done. So lots of wires hooked up to them... Only draw back, I broke the head off of one of the allen bolts , maybe I overtightened it, but using only a allen wrench I seriously doubt it. Out of four bolts between both clamps, only one failed. Simple fix, just used a hex head with the same threads, cover still fit on just fine. This really cleaned up my wires on top of the battery. Well worth the money..!!!
Date published: 2008-05-16
Rated 4 out of 5 by from Quality pieceThis product works perfectly! Execellent quality!
Date published: 2007-11-18

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
StreetWires BC2P Battery Clamp (+) Positive

Customer Projects

Customer projects that include: StreetWires BC2P Battery Clamp (+) Positive

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software