Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Steel Mesh 2-Piece Grill for 12" Speaker Black
How big are the holes in the mesh? Is it easy or difficult to see the speaker behind the grill. I'm looking for something that has 1/8" holes or smaller and hides the speaker.
The holes in these grills are about 1.8mm in diameter.
Date published: 2014-05-19
I have a Titanic MKIII 12" sub I would like to use this with. Will it fit over the rubber gasket surround? The Titanic is 12.5" diameter soo this looks like it would work. Thanks, Larry
The grill will likely fit around the frame although it will not provide enough clearance for excursion. Unfortunately we do not have any grills that will work with our high excursion subwoofers unless you use stand offs for this grill, or the bar grills available.
Date published: 2014-01-20
With a 10 7/8" I.D., does this grill fit any of the 12" speakers you sell? Eminence, JBL, Celestion, B&C, and Dayton all require a larger cutout.
This product is designed to fit 12" drivers, and does a good job on many. For 12" drivers with larger frames, we would typically recommend moving up to a 15" grill, such as I've linked below.
Date published: 2012-05-08
What size gauge material? And how much room for excursion?
I have an odd sized 10" sub, so I was going to purchase a 12" grill and bolt it to the enclosure. But my sub has 17mm (0.66") of excursion, so I need a grill with at least 3/4" of room.
I unfortunately don't have the gauge of the material, however, it is a robust item. The overall depth is approximately 15/16", so I don't anticipate any difficulties there.
Date published: 2012-02-01
Could you please tell me the ID and OD of the mounting frame?
The outside diameter of the mounting ring is approximately 12-9/16", with the inside diameter of that outside ring at 12-1/2" to accommodate speakers up to that maximum overall diameter. The inside diameter of the inside of the mounting ring is approximately 10-7/8". I've attached a rough sketch for reference.
Date published: 2012-07-28
My woofer frame is 12.25" in diameter, will these fit?
This grill will fit a speaker up to 12-1/2" in diameter, so it should fit your speaker just fine.If you have a subwoofer with a large roll surround that protrudes from the frame, this grill is not recommended. The grill below would work though.
Date published: 2011-03-18