Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Steel Mesh 2-Piece Grill for 10" Speaker Black
which goes first, the ring or the speaker, and where / how do the clips go
does the ring go on first or the speaker, and where do the clips go?
The ring mounts first, the grill snaps on to the ring. The clips are included for situations where you're mounting to a thin panel such as a car door, where you'd place the clip on the back side of said panel to give the screw something more substantial to "bite" into.
Date published: 2012-02-08
Ring plastic or steel
Is the ring plastic or steel?
The ring and grill are both steel.
Date published: 2012-10-15
Clearance for excursion?
I thought about using these for the Peerless SLS10, but am concerned the speakers large surround & excursion would make contact with this grill. Can you confirm if this would happen, or is there enough clearance?
The distance from the rear of the mounting flange on the woofer to the peak of the surround is ~10.2mm and the grill stands about 13mm. This will probably not be enough room for full excursion.
Date published: 2012-10-31
Folks might want to know- What type of mesh? Wire? Perforated sheet ? If perfed, Gauge ? Total depth ? PE rocks the Casbah!
This grill is not a wire mesh, it is a perforated sheet. Unfortunately, I don't have a specification on the gauge of the material, nor do I have an accurate means of measuring such a thing. The overall depth is approximately 13/16".
Date published: 2011-03-25
What is the mounting ring screw holes diameter?
The diameter of the screw holes is 5/32". The on center distance diagonally is 9-5/8".
Date published: 2013-03-19
Does this ring mount to the subwoofer basket/gasket, or does it mount to the outside of the basket
This is designed to be mounted to the surface of the basket.
Date published: 2014-03-03