1-3/8" Speaker Mounting Top Hat Steel

Manuals & Resources

Speaker Mounting Top Hat for 1-3/8" Tripod Stand Steel

Quickly transforms existing speaker cabinets for use with tripod speaker stands. Simply cut a hole, mount inwardly to bottom of speaker cabinet and your cabinet is now ready for both floor and tripod stand use. For use with 1-3/8" diameter stands. Steel construction.
In Stock
Your Price
$6.69
Buy 10-49 $6.43
Buy 50+$6.07
Part # 245-012
Share:
Highlights
  • For use with 1-3/8" (35mm) diameter tripod speaker stands
  • Constructed of 0.12" (3.0mm) thick steel for reliability, durability & safety
  • Includes mounting hardware
  • Requires 1-5/8" cabinet hole cutout
  • Depth: 3-3/4", Plate width: 4-1/2"

Product Details

Speaker Mounting Top Hat for 1-3/8" Tripod Stand Steel
Quickly transforms existing speaker cabinets for use with tripod speaker stands. Simply cut a hole, mount inwardly to bottom of speaker cabinet and your cabinet is now ready for both floor and tripod stand use. Avoid the hassle of standard tripod mounting plates. Bolt holes are spaced 3-1/2" center-to-center across and 2-1/2" side-to-side.


Speaker Mounting Top Hat for 1-3/8" Tripod Stand Steel
  • BrandParts Express
  • Part Number245-012
  • UPC844632017827
  • Product CategorySpeaker Top Hats / Pole Sockets
  • Unit of MeasureEA
  • Product Rating
    (33 Reviews)
  • Weight0.85 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Reviews

Speaker Mounting Top Hat for 1-3/8" Tripod Stand Steel
Speaker Mounting Top Hat for 1-3/8" Tripod Stand Steel is rated 4.1212 out of 5 by 33.
Rated 1 out of 5 by from Only good to plug the holeThese are total junk and are unusable very disappointed that they would even sell something of such low quality. I can't even use them because they are so sloppy. Don't buy them.
Date published: 2015-05-25
Rated 5 out of 5 by from Great Service!Excellent company,ships fast priced right they have great customer service.
Date published: 2015-03-29
Rated 1 out of 5 by from Bad designThe items I received leaked air. On each unit the end cap was tack welded onto the cylinder creating a large air gap and compromising the strength of the top hat right where the top of the pole rested. I went back to Penn Elcom top hats.
Date published: 2012-09-10
Rated 5 out of 5 by from Heavey Weight UserUsing this to mount a Peavey PV-215 on speaker stands. Great once you get hole balance in the speaker. This is a soild top hat.
Date published: 2011-10-03
Rated 4 out of 5 by from Good...but..The mounting hardware included (screws) did not lie flush. On top of that the top hat itself did not lay flat.
Date published: 2010-11-04
Rated 3 out of 5 by from Plug Should be Installed on the Inside of Tube!For the best results out of this, a guy needs to weld his own plug on the end of the tube. It comes with a cheap plastic one installed on the top / outside of the tube. I'm not a welder so I reversed the plastic plug to be on the inside of the tube. That way the weight from my speakers are constantly applying pressure to seal it better. This keeps the plug in place during use. Even then it is not completely sealed without adding some silicone or something. Overall the this could have been a great product if they just would have finished it. All they would have had to do is weld a flat plate onto the top to seal the thing off. It has a deeper tube for more strength and stability than the plastic offerings I've used in the past. That is a plus, but it only stabilizes this things main negative point.Overall a guy can make it do what he needs it to do. This product just forces us to do more work than we should have to.
Date published: 2010-01-04
  • 2015-08-02T07:46CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_33
  • loc_en_US, sid_245-012, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Speaker Mounting Top Hat for 1-3/8" Tripod Stand Steel

Does this socket have a solid bottom, in other words, will the pole not slip through and damage the speaker? Thanks

Asked by: Tommy1948
it's solid or it would act like a port hole when not used
Answered by: digitalhaven 53
Date published: 2012-09-05
  • 2015-08-02T09:53CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_245-012, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software