Port Tube 3-3/4" ID x 7-5/8" L Flared

Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared

Overview
This high-quality port tube features an external flare for reduced port turbulence and enhanced aesthetic appeal. Perfect for tuning subwoofers or pro sound cabinets. Ports are a press-fit style and can be trimmed to length if needed.
Part # 
260-480
Weight: 0.28 lbs.  
IN STOCK
Your Price
$6.25
Buy 4-49 $5.75
Buy 50-up$5.15
Part # 260-480
Qty:  EA
Available Payment Methods

Product Details

Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared
This high-quality port tube features an external flare for reduced port turbulence and enhanced aesthetic appeal. Perfect for tuning subwoofers or pro sound cabinets. Ports are a press-fit style and can be trimmed to length if needed. Requires 5-3/8" opening. Outside diameter is 5-9/16".


Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared
  • BrandJantzen Audio
  • Part Number260-480
  • UPC844632054310
  • Product CategorySpeaker Port Tubes
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.28 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared
in the Speaker Port Tubes product category.

Reviews

Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared
Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared is rated 4.0 out of 5 by 6.
Rated 5 out of 5 by from Let's Get Smooth BassI am one who congratulates my purchase. This is the best port tube that I've purchased. And the price is great. Well worth it. I am getting many responces from those who see and listen to my speakers.
Date published: 2013-09-18
Rated 3 out of 5 by from Careful Cutting The Hole On This One!This tube works great, but the hole opening is VERY critical as the outer flange is tiny! The 3 3/4" dim is more like 3 7/16" if memory serves. We make them tight enough so they have to be tapped in with a rubber mallet. It's also tough to find a good glue surface.They work fine, but be very careful when cutting the holes!
Date published: 2012-09-19
Rated 4 out of 5 by from Boy what a difference these made!Built a three 15 sub box for my customer and used four of these port tubes and let me tell you it made the subs rock.Great price easy to install,can't go wrong.
Date published: 2011-02-17
Rated 4 out of 5 by from Great Bang for Your Buck!Im using two of these in a bandpass box with a 12mm excursion 12. There is no port noise whatsoever. The tuning frequencuy I was going for was rather high because of the nature of a bandpass box, therefore the length of these things was not a problem. They are inexpensive, flared so reduced port noise, and they give the box the store bought box look, but without the store bought price!
Date published: 2011-02-17
Rated 4 out of 5 by from High performance tubeThis gets the noise reduction of the expensive aero ports without the price. I would have given a higher rating for features if it was longer. Still usable in my application, it will limit some uses in a smaller box where more length is required.
Date published: 2011-02-17
Rated 4 out of 5 by from Good looks, good quality, but a few complaintsThis is a great general flared port. I used it do tune a 4CF bass cabinet loaded with two 8" drivers tuned to 30Hz and it works wonders. looks good too. my complaint is that the main portion of the tube is truncated a bit. this makes trimming it to length a little more complex. i had to make a wooden jig to hold it in ordered to get things just right. also, i wish it had a nice end fitting for an inside flare. All else aside, a nice product.
Date published: 2011-02-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared

Customer Projects

Customer projects that include: Speaker Cabinet Port Tube 3-3/4" ID x 7-5/8" L Flared

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Parts Express Free Shipping at 98 Dollars

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1