260-323_ALT_0.jpg
260-323_ALT_0.jpg
 
260-323_ALT_0
 

Speaker Cabinet Port Tube 2-3/4" ID x 1" L

Brand:| Model: M1533
Overview
Give your cabinets a professional appearance with these attractive, black plastic port tubes. When properly tuned, the port contributes significantly to the low frequency output of the speaker system.
Part # 
260-323
Weight: 0.0528 lbs.  
IN STOCK
Your Price
$0.68
Buy 10-99 $0.62
Buy 100-up$0.58
Part # 260-323
Qty:  EA
Available Payment Methods

Product Details

Speaker Cabinet Port Tube 2-3/4" ID x 1" L
Give your cabinets a professional appearance with these attractive, black plastic port tubes. When properly tuned, the port contributes significantly to the low frequency output of the speaker system. 3" diameter cutout required.


Speaker Cabinet Port Tube 2-3/4" ID x 1" L
  • BrandPenn-Elcom
  • ModelM1533
  • Part Number260-323
  • UPC844632041655
  • Product CategorySpeaker Port Tubes
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.0528 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Speaker Cabinet Port Tube 2-3/4" ID x 1" L
in the Speaker Port Tubes product category.

Reviews

Speaker Cabinet Port Tube 2-3/4" ID x 1" L
Speaker Cabinet Port Tube 2-3/4" ID x 1" L is rated 4.6667 out of 5 by 6.
Rated 5 out of 5 by from Great product!I bought this to replace one in a bandpass sub box. It was the exact fit for what I needed.
Date published: 2012-05-25
Rated 4 out of 5 by from NiceGreat for what I use them for. One thing to note. The cutout recommended is a tad bit too big. If you are lining the opening with carpet it will work great. If you are mounting it through bare wood, it will have to secure it with silicone or similar. Unfortunately, they don't have 2 7/8" hole saws.
Date published: 2011-11-11
Rated 4 out of 5 by from Beauty RingI bought these for installing cables thru the top of a cabinet. haven't installed them yet, will work perfect. They have a nice wide flange to cover up the minor inperfections from cutting the finished surace. Will be used for a church sound board.
Date published: 2009-11-26
Rated 5 out of 5 by from good for experimenting...At around a buck a piece, these are great for fiddling with aperiodic enclosure alignments. Use some strong adhesive around the rim on "inside" end, lay on a piece of window screen or breathable fabric, trim the excess and start playing around with varying amounts of fiberglass or polyfill stuffed into it. When you are satisfied with the quality and quantity of bass output (if you are at all, some people don't like the resulting sound of an aperiodically damped anclosure), strecth a piece of breathable fabric accross the open end and secure it on the backside of the lip. A clean, pro look for just a few bucks. My wild guess rule of thumb would be to use one vent for up to 1ft3, 2 vents for up 2ft3, and 3 vents beyond that. Again, good for the tinkerer in you.
Date published: 2009-11-13
Rated 5 out of 5 by from Product worked perfect.Product worked perfect. I needed the exact mesured port and got what they listed. shipping was fast and had no hassels. will buy from again.
Date published: 2009-06-03
Rated 5 out of 5 by from Very fine after-market product for those of you whI couldn't find a dealer or parts store for my old SWR Goiath Junior II speaker port holes. As you guys are all aware, these old SWR cabs (Pre-Fender) are the better products of SWR Engineering of Sylmar, California during the late 80's and early 90's...since then, the newer SWR's, (in my opinion)are not as great in sound and quality, the same with the parts. Most of all, hard to find replacement parts. Parts Express is a savior ! :) This porthole replacement fits exactly to a T. Thanks !! So if you need to replace those 2 black round plastic portholes in the back, this will fit perfectly !!!
Date published: 2008-10-20

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Speaker Cabinet Port Tube 2-3/4" ID x 1" L

Customer Projects

Customer projects that include: Speaker Cabinet Port Tube 2-3/4" ID x 1" L

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1