Port Tube 1-5/8" ID x 4-7/8" L Flared

Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared

Overview
This high-quality port tube features an external flare for reduced port turbulence and enhanced aesthetic appeal. Perfect for tuning small high-performance bookshelf or standmount speakers. Ports are a press-fit style and can be trimmed to length if needed.
Part # 
260-474
Weight: 0.01 lbs.  
IN STOCK
Your Price
$3.98
Buy 4-49 $3.62
Buy 50-up$2.98
Part # 260-474
Qty:  EA
Available Payment Methods

Product Details

Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared
This high-quality port tube features an external flare for reduced port turbulence and enhanced aesthetic appeal. Perfect for tuning small high-performance bookshelf or standmount speakers. Ports are a press-fit style and can be trimmed to length if needed. Requires 2-1/16" opening.


Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared
  • BrandParts Express
  • Part Number260-474
  • UPC844632054280
  • Product CategorySpeaker Port Tubes
  • Unit of MeasureEA
  • Product Rating
    (3 Reviews)
  • Weight0.01 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared
in the Speaker Port Tubes product category.

Reviews

Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared
Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared is rated 3.0 out of 5 by 3.
Rated 1 out of 5 by from Not accurately describedFirst of all, the inside diameter of this port tube is not consistent end-to-end because the tube is tapered. As measured with my caliper, the ID at the mouth of the port (excluding flare) is 1.675", while the ID at the opposite end is 1.465".Secondly, how hard would it be for PE to mention something like this in the product description? The dimensions have a significant bearing on how the port can and will be used, so they should be accurately described.I purchased four of these port tubes with the intent to make two longer, double-flared ports by trimming them to length and gluing them back to back. If I use these for that purpose, I will end up with hour-glass shaped ports. Unfortunately, they are not worth the time and cost of returning, so I guess they go into the garbage.
Date published: 2012-03-15
Rated 4 out of 5 by from N/Athe port tube will be better if it were a big longer to let margin to adjust or tune the box.
Date published: 2008-02-22
Rated 4 out of 5 by from Cutout info is wrong!The info says this port needs a 1 3/4 cutout, but its actually 2 3/16.Nice quality.
Date published: 2008-01-13

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared

What is the outer flange diameter?

Asked by: BJon
IT IS 2 1/4''
Answered by: bigmike
Date published: 2014-04-27

Customer Projects

Customer projects that include: Speaker Cabinet Port Tube 1-5/8" ID x 4-7/8" L Flared

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1