Speaker Cabinet Port Tube 1-1/8" ID x 6-1/2" L Flared
Speaker Cabinet Port Tube 1-1/8" ID x 6-1/2" L Flared is rated out of 5 by 3.
Rated 3 out of 5
by Jason - 18011
from Strange port, but it worksI like the fact that the port is flared, but it is only flared on the outside, and one thing that struck me as odd is the port is actually tapered, meaning that the diameter of the port continually gets larger from the inside end to the outside end. This makes it difficult to tune via computer program and you have to do some experimentation.Also, the flange part is preceeded by mounting grooves as can be seen in the picture. The diameter of the mounting grooves is almost the same as the diameter of the flange at the end, so if you don't have a circular cutting bit with exactly the right diameter, the ports are going to be hard to fit. I would not buy this port again but would instead look for something flanged at both ends with a non-tapered inside.
Date published: 2009-01-03
Rated 4 out of 5
by SpeakerBuilder - 04009
from Excellent ValueMakes a huge difference in speaker performance. 1-7/8" diameter hole saw for proper fit required. great product, excellent value.
Date published: 2007-11-05
Rated 5 out of 5
by J Anderson - 02380
from Stylish Port Tube Makes Any Cabinet Look GreatThis Is A Nice Style Of Port Tube! When Installed, It Offers A Nice Sleek Look Without The Large Outer Mounting Ring Some Tubes Have!Care Must Be Used In Cutting Out The Holes For This Style Of Tube. They Are A Press Fit, So If The Hole Is A Bit Large, You Have A Problem!
Date published: 2007-09-14