Single Gang Reversible Bulk Cable Wall Plate White

Single Gang Reversible Bulk Cable Wall Plate White

Overview
Unique to this wall plate is a removable cable plate hood which may be installed on the outside of the wall for cable protection, or inside of the wall for use as a flush cable port that creates a custom hidden in-wall cable management system.
Highlights
  • Unique two-piece wall plate design provides for easier installation
  • Removable and reversible hood design
  • Accommodates HDMI, DVI, VGA, and audio cables
  • Designed to fit standard electrical J-boxes
  • Perfect installation piece for plasma and LCD TVs
Part # 
261-160
Weight: 0.07 lbs.  
IN STOCK
List Price$4.99
You Save36%
Your Price
$3.19
Buy 4-up$2.79
Part # 261-160
Qty:  EA
Available Payment Methods

Product Details

Single Gang Reversible Bulk Cable Wall Plate White

Bulk cable wall plates save installation time and money while providing a clean finished appearance. Unique to this wall plate is a removable cable plate hood which may be installed on the outside of the wall to provide maximum cable protection and to keep debris from falling into the wall. Alternatively for flat panel TV installations, where space between the wall and the TV is at a minimum, the cable hood may be mounted inside of the wall for use as a flush cable port that creates a custom hidden in-wall cable management system.

Note: A low voltage mounting bracket is needed to install this wall plate. See related items for the appropriate bracket.



PRODUCT SPECIFICATIONS
  • SizeSingle Gang
  • FinishWhite
Single Gang Reversible Bulk Cable Wall Plate White
  • BrandParts Express
  • Part Number261-160
  • UPC741835079723
  • Product CategoryBulk Cable Wall Plates
  • Unit of MeasureEA
  • Product Rating
    (8 Reviews)
  • Weight0.07 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Single Gang Reversible Bulk Cable Wall Plate White
in the Bulk Cable Wall Plates product category.

Reviews

Single Gang Reversible Bulk Cable Wall Plate White
Single Gang Reversible Bulk Cable Wall Plate White is rated 5.0 out of 5 by 8.
Rated 5 out of 5 by from Easy to install, works perfectI mounted a couple of monitors on the wall that my desk butts up to as a nice way to free up deskspace. I used one of these wall plates mounted directly behind the monitor to channel the monitor cables into the wall, and a second wall plate below the desktop to bring the cables back out to connect to the computer under the desk. The final installation was nice and clean with no visible cables. The cable "hood" reverses easily and installation was a snap. You will need to order a single gang mounting bracket to mount the wall plates. And if you need to hide more than 2 or 3 cables, consider the the double gang version.
Date published: 2012-10-17
Rated 5 out of 5 by from Great all aroundVery nice wall plate. Easily reversible and cables fit perfectly through it.
Date published: 2011-01-28
Rated 5 out of 5 by from AwsomeAwesome used in conjunction with a single gang wall braket and produced a smooth appearance for my Plasma TV wall mounting used at the TV and at floor level on the wall to route my wire great product simplified my instillation greatly. Would highly recommend these for this type of application.
Date published: 2010-12-27
Rated 5 out of 5 by from Just what I needed.Used to run cables from one side of wall up high (LCD Mounted on wall) to lower side of other wall (Other room entertainment center). The worked perfect. I just ran the cables through and dropped them down the wall. Looks alot cleaner than if I were to just poke the cables through the wall. I was also able to flip the hood around for mounting behind the TV, so there are absolutely no cables shown going to the TV.One minor issue, one of them came with a crack in one of the tabs that holds the hood on, but nothing a little crazy glue couldn't fix.
Date published: 2009-12-02
Rated 5 out of 5 by from PerfectPerfect for its application. Paintable and easy to install. Used it to hide speaker cable in the wall, and worked like a charm. You will need a Single Gang Low Voltage Mounting Bracket to go with this, unless you are installing into a wiring box.
Date published: 2009-01-12
Rated 5 out of 5 by from Perfect fitThis wall plate it perfect for mounting flat panel TVs on wall. The reversible feature is nice also.
Date published: 2009-01-11

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Single Gang Reversible Bulk Cable Wall Plate White

Customer Projects

Customer projects that include: Single Gang Reversible Bulk Cable Wall Plate White

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software