252-120_ALT_0.jpg
252-120_ALT_0.jpg
 
252-120_ALT_0
 

Sherwood RX-5502 Multi-Room Stereo Receiver

Brand:| Model: RX-5502
Overview
Whole-house audio is now easier thanks to Sherwood. The RX-5502 is designed to provide complete stereo receiver control and amplification to two "zones" at the same time. You can now listen to your favorite albums, CDs, or DVDs—while the ballgame is on the radio in another room.
Highlights
  • Complete two zone control
  • Distributed audio made easy
  • Twin TDAS Discrete Amplifier Stage amplifiers
Part # 
252-120
Weight: 21.82 lbs.  
OUT OF STOCK
Due In: 6/12/2015
List Price$229.00
You Save23%
Your Price
$177.00
Part # 252-120
Qty:  EA
Available Payment Methods

Product Details

Sherwood RX-5502 Multi-Room Stereo Receiver

Whole-house audio is now easier thanks to Sherwood. The RX-5502 is designed to provide complete stereo receiver control and amplification to two "zones" at the same time. You can now listen to your favorite albums, CDs, or DVDs—while the ballgame is on the radio in another room. Four dedicated speaker outputs ensure a straightforward connect-and-forget system that brings audio into four separate rooms. With the installation of IR repeater systems (not included), you don't even need to install local volume controls. Dual TDAS® Discrete Amp Stage amplifiers drive two pairs of stereo speakers (each in parallel) and ensure reliable sound quality that most whole house audio amplifiers fail to deliver. 400 watts of genuine power lets you crank the volume without running out of headroom. Four analog stereo inputs, one phono input, and one analog stereo output. Features and

Specifications: • Power output per amplifier section: 2 x 100 watts (20-20,000 Hz, 0.7% THD @ 8 ohms) • Input impedance: 47k ohms • Analog stereo inputs: 4 • One analog audio output • AM/FM tuner • Dual zone remote control • Bass/treble controls • 1/4" Headphone jack • Dimensions: 5-9/16" H x 17-3/8" W x 14-1/2" D.



Product Specifications
  • Power Output Per Channel100 Watts
  • Receiver Type4 Channel Stereo
Sherwood RX-5502 Multi-Room Stereo Receiver
  • BrandSherwood
  • ModelRX-5502
  • Part Number252-120
  • UPC093279453943
  • Product CategoryHome Theater Receivers & Stereo Receivers
  • Unit of MeasureEA
  • Product Rating
    (8 Reviews)
  • Weight21.82 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Sherwood RX-5502 Multi-Room Stereo Receiver
in the Home Theater Receivers & Stereo Receivers product category.

Reviews

Sherwood RX-5502 Multi-Room Stereo Receiver
Sherwood RX-5502 Multi-Room Stereo Receiver is rated 4.375 out of 5 by 8.
Rated 4 out of 5 by from Good 2 zone receiver.Only 3 weeks into using the Sherwood, but so far its been a positive experience. Product arrived promptly, setup was a no brainer. As mentioned elsewhere the tone controls leave a bit to be desired, too broad-banded for my taste. The only thing I could call criticism would be the menu function. Its a bit too layered in places but once you get thru it its no big deal. Haven't really sat-on the volume control, but the amps seem to hold up well to moderate outdoor levels which takes more power in most settings. Hey for $160 you can't go wrong. I might buy another soon.......
Date published: 2014-06-14
Rated 5 out of 5 by from Good Basic Receiver/Amp...I bought a Sansui 771 back in 1975 when I was in the USAF in SEA. When it finally went jillflirty a few years ago, I looked for something similar...that is a good basic unit w/enough inputs for my Turntable, CD's, DVDs and games,plus enough speaker outputs and basic controls such as input select, balance, base & treble. About the only thing I could find w/power & specs was a Yamaha but it had way more "bells&whistles" than I really wanted. So when one side's output died I found this unit. It had specs like I wanted plus just the right amount of desired features. It arrived in just a few days and I had it up & running in short order. There is a phono input but I think there is an impedance mismatch w/my turntable. I hooked it to the AUX & it works fine. Overall I am very pleased w/the purchase, both product and service.
Date published: 2014-05-30
Rated 4 out of 5 by from RX-5502 stereo receiverUnit has good sound, no distortion, radio tuner works great, remote works well. Drives 2 channels, 4 boxes with 16 speakers rated at 100 watts or less, this unit has more power than my speakers can handle. Has 5 inputs, all work well. Down side, no power on light, takes a few seconds to warm up and work and keep unit clear of obstructions to air flow, unit does become warm. Over all I'm happy with this unit.
Date published: 2013-09-17
Rated 5 out of 5 by from Serves its purpose perfectly, at a bargain!This unit has exactly the features I need for installing dual-zone whole-house stereo. Not home theater - stereo! My clients are so happy when I tell them the price. It has a sufficient number of inputs and the two zones are completely independent. It drives four pairs of speakers with ease and is plenty powerful.Did I mention what a bargain? Worth twice the price!
Date published: 2012-02-29
Rated 4 out of 5 by from Good functionality for the priceCompared to other receivers, it's not bad for the price, 4 channels w/ 2 independent zones......not bad for under $200. I'm over $300 for Onkyo and over $400 for Denon to get independent zone functions(these units do alot more though), but the simplicity of the zone fuctions and channel usage are great for people not lookin' to be overwhelmed by fuctions and sound dimensions, but simply just want some audio in different locations
Date published: 2009-10-06
Rated 4 out of 5 by from Good, but ....Tone Controls have broad Bandwidth so that they truly don't pump up just the Lows or Highs you want. The Speaker Ohms required, to use all 4 Sets of Speakers, in the Instructions are very confusing considering that there are 2 Stereo Amps within the unit. It should handle 8 Ohms for all, not 16 Ohm minimums.
Date published: 2008-12-15
  • 2015-05-27T07:17CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_252-120, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Sherwood RX-5502 Multi-Room Stereo Receiver

Hi, Can I use this receiver to power 4 x 8 OHM (polk audio outdoor sat 30 speakers) and their passive atrium 10 subwoofer (8OHM). Thanks

Asked by: nicktheo77
yes, if all speakers are at least 8 ohms.
Answered by: TomI
Date published: 2015-05-11

I purchased from you a sherwood RX-5502 amp, and just getting around to hooking up, I have the speakers wired in but getting no sound, i have selected all combinations of Speakers a b and c, any suggestion to what my problem is? Thank you Rich

Asked by: RichardT
Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-03-10

what cable do i need to connect the sherwood rx5502 to my LG tv in order to get surround sound? i also have a bose subwoofer and speakers. thanks

Asked by: elizabethnickel
This is only a stereo receiver and will only accept a left and right line level input. You will have to use a standard RCA patch cable from the output of your TV, if the TV only has digital outputs you will have to use a digital to analog converter.
Answered by: MattP
Date published: 2014-12-31

Can I be able to connect and monitor an EQ with this unit?

Asked by: RunRun
This unit does not have any way to hook up any processing. That usually requires a pre out main in type loop.
Answered by: Chrisf
Date published: 2015-01-05

"With the installation of IR repeater systems (not included), you don't even need to install local volume controls." But, will it work with local volume controls?

Asked by: RamboRon
Yes, use the impedance matching type volume controls to stabilize the load to the amplifier.
Answered by: TomI
Date published: 2014-10-09

I am setting up an outdoor pool house stereo system. I want a receiver to power 2 pair of outdoor TIC APS120 & 1 TIC GS50. I think I need receiver with 3 pair of speaker capability? Most only have 2, A & B. What do I need?

Asked by: willieains
Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2014-09-02
  • 2015-05-27T10:05CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_252-120, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: Sherwood RX-5502 Multi-Room Stereo Receiver

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1996-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software