Selenium ADM25-25 Horn Adapter

Brand:|Model: ADM25-25
Adapts a 2-bolt/3-bolt 1" throat driver to a 1-3/8"-18 TPI horn.
In Stock
List Price$6.69
You Save13%
Your Price
$5.79
Part # 264-323
Share:
Highlights
  • Solid aluminum construction for a rigid mounting surface
  • Works with standard 2-bolt or 3-bolt compression drivers
  • Mounting hardware included

Product Details

Selenium ADM25-25 Horn Adapter
Adapts a 2-bolt/3-bolt 1" throat driver to a 1-3/8"-18 TPI horn.


Product Specifications
  • Mounting TypeHorn Adapter
  • Entry / Throat Diameter1"
  • ConstructionAluminum
Selenium ADM25-25 Horn Adapter
  • BrandSelenium
  • ModelADM25-25
  • Part Number264-323
  • UPC7896359519255
  • Product CategoryHorns & Waveguides
  • Unit of MeasureEA
  • Product Rating
    (8 Reviews)
  • Weight0.32 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Selenium ADM25-25 Horn Adapter
in the Horns & Waveguides product category.

Reviews

Selenium ADM25-25 Horn Adapter
Selenium ADM25-25 Horn Adapter is rated 4.25 out of 5 by 8.
Rated 2 out of 5 by from caution using bolts suppliedI bought these plates to use on my Selenium compression driver. The holes all match up perfectly. However the bolts supplied do not fit. The holes in the driver are metric, the bolts are standard. No problem, I just went and picked up some new bolts at the hardware store, I brought one of the other bolts to match the length. Guess what? After putting in the new bolts, they bottom out without being tight. I can understand someone mixing up the metric and standard, but the length too. What if someone tries to tighten them down and damage the driver? A little better quality control in order.
Date published: 2013-08-23
Rated 5 out of 5 by from Simple Idea.Dear people at Selenium. You've just saved me a lot of frustration and time. Thank you. I wanted to replace Klipsch 1 inch drivers with JBLs. But I wanted to keep my Klipsch horns. Now I have a JBL 2470 driver on Klipsch horn in no time.
Date published: 2009-08-19
Rated 5 out of 5 by from good designIv'e used this adapter in a few projects. The reason I'm bothering with this review is because of the versatility of this product. The aluminum is thick enough to file/drill to match with any bolt-on. One compression driver I used it with had non-standard mounting holes, no problem with the Selenium ADM25-25.
Date published: 2009-08-02
Rated 5 out of 5 by from Real Metal AdapterCorrect threads and bolt holes.Very Nice!So much better than the plastic Selenium ADF25 264-322.
Date published: 2009-04-30
Rated 5 out of 5 by from does the jobIt does exactly what you would expect it to do. The only thing I want to add as a caution is, if you thread this onto a metal horn/ lens, make certain to apply some 'pipe dope' to the threads first or else you run the risk of the aluminum threads binding up and you will not be able to remove the adapter later. Remember: pipe dope (it's a plumbing thing).
Date published: 2009-03-17
Rated 4 out of 5 by from Not preciseThe passage is not constant in cross section area. It's bigger on the driver's end and smaller on the horn throat's end -- it's not expending, but shrinking! So from the phase plug of the driver to the horn, there're 2 odd steps already. It definitely needs some more works.
Date published: 2008-12-04
  • 2015-08-31T07:13CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_264-323, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Selenium ADM25-25 Horn Adapter

Can I use this Selenium ADM25-25 Horn Adapter for「 B&C DE500-8 1" Neo Titanium Horn Driver 8 Ohm 2/3-Bolt」, and 「B&C ME45 1" Exponential Horn 90x40 2-Bolt」? kind regards.

Asked by: Machan
That driver is capable of being mounted directly to that horn. no adapter is necessary.
Answered by: Chrisf
Date published: 2015-04-07

How many mounting holes?

The description says 2, the photo shows 5.
Asked by: Permitwriter
This has 5 total holes, it will adapt a 2 or 3 bolt driver.
Answered by: MattP
Date published: 2014-12-14
  • 2015-08-31T08:00CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_264-323, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software