Sanus LC1A LCD/Plasma 37"-70" Black Ceiling Mount w/Adapters

Brand:|Model: LC1A
The VisionMount LC1A is a tilt and swivel ceiling mount for large flat-panel TVs. This mount is a great choice for space-saving corner placement or when wall mounting is not an option.
In Stock
- Order Soon - Only 3 Left In Stock
Your Price
$319.99
Part # 185-485
Share:
Highlights
  • Universal mounting pattern
  • Allows for unlimited TV placement
  • Solid heavy-gauge steel construction
  • Virtual Axis provides easy tilt, swivel, and roll adjustments

Product Details

Sanus LC1A LCD/Plasma 37"-70" Black Ceiling Mount w/Adapters

The VisionMount LC1A is a tilt and swivel ceiling mount for large flat-panel TVs. This mount is a great choice for space-saving corner placement or when wall mounting is not an option. Sanus Systems' Virtual Axis technology allows the mount to tilt up and down with the touch of a finger, and a unique wire management channel conceals and routes cables from ceiling to TV. This mount includes ceiling adapter plates for wood joist or solid surface ceilings as well as two pipe lengths for multiple configurations. Universal mounting brackets fit virtually any flat-panel TV from 37" to 70" and up to 175 lbs.

Specifications: • TV size: 37"-70" • Tilt range: +15°, -5° • Swivel range: ±90° • Roll range: ±6° • Max supported weight: 130 lbs. • Mounting pattern: Universal • Dimensions: 46" H x 29-1/2" W x 10-1/4" D.



Product Specifications
  • Mount TypeSwivel / Tilt
  • Mount StyleCeiling Mount
  • TV Capacity30" to 39",40" to 49",50" to 59",60" to 69",70" and up
Sanus LC1A LCD/Plasma 37"-70" Black Ceiling Mount w/Adapters
  • BrandSanus
  • ModelLC1A
  • Part Number185-485
  • UPC793795363305
  • Product CategoryTV Mounts & Brackets
  • Unit of MeasureEA
  • Weight26.45 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Sanus LC1A LCD/Plasma 37"-70" Black Ceiling Mount w/Adapters
in the TV Mounts & Brackets product category.

Reviews

Sanus LC1A LCD/Plasma 37"-70" Black Ceiling Mount w/Adapters

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Sanus LC1A LCD/Plasma 37"-70" Black Ceiling Mount w/Adapters

Hi can this be instaled without running cables through the ceiling?

Asked by: isis
Yes, you can tie the cables to the pipe instead of running them through it.
Answered by: MattP
Date published: 2014-02-24

70" tv or not? The title says 37 - 70 but the spec say 30-55. If I stay under the stated 130lb I should be ok?

Asked by: Relic
Maybe and maybe not. The issue is primarily weight, but so is torque. A 70" set pushed sideways can present significant twist to the hardware. You also want to be sure the mount can accommodate the horizontal physical distance between mounting points on your particular set. Some sets may not be VESA-compliant, for example, and may have unique mounting arrangements.Most importantly, however, be really, really, REALLY sure that the structure to which you attach the mount can accommodate the load. Most horizontal surfaces, like ceilings, cannot. In most cases, you can, at best, attach to a single joist, and lagging into one joist is completely inadequte. Bear in mind that you can only locate two bolts (not the intended four) into a joist that is only an inch and a half wide, and that you must somehow prefectly center them into the wood, which is concealed behind drywall. Also, you are placing this entire load on one joist, which more than likely was never sized for this use anyhow.You should consider using sister joists (of adequate length) or blocking intended for this application. Please do NOT short cut this critical issue.
Answered by: Sarge
Date published: 2011-10-11

Hi, Is is capable of being mounted to a vaulted ceiling or is an adapter needed?

Asked by: big bear
This product is designed to be mounted to a flat horizontal surface. For a vaulted ceiling, I would suggest building some manner of angled spacer, providing a level surface to which you could affix this mount.
Answered by: RussR
Date published: 2011-09-24
  • 2015-08-01T09:41CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_185-485, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software