High Power Terminal with Fuse Holder

Round Speaker Terminal Cup with Fuse Holder Banana Binding Post

Overview
Recessed-mount terminal with high current binding post type connectors. Built-in AGC fuse holder. Accepts up to 10-12 gauge wire. Overall size: 4-1/8" round; cutout: 3-1/8" round.
Part # 
260-293
Weight: 0.1914 lbs.  
IN STOCK
Your Price
$4.50
Buy 10-49 $3.89
Buy 50-up$3.46
Part # 260-293
Qty:  EA
Available Payment Methods

Product Details

Round Speaker Terminal Cup with Fuse Holder Banana Binding Post

Recessed-mount terminal with high current binding post type connectors. Built-in AGC fuse holder. Accepts up to 10-12 gauge wire. Can also be used with dual banana plugs. Includes gasket.

Dimensions: • Overall size: 4-1/8" round; cutout: 3-1/8" round. 1/4" rear disconnects.



Round Speaker Terminal Cup with Fuse Holder Banana Binding Post
  • BrandParts Express
  • Part Number260-293
  • UPC844632017230
  • Product CategoryTerminal Plates & Cups
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight0.1914 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Round Speaker Terminal Cup with Fuse Holder Banana Binding Post
in the Terminal Plates & Cups product category.

Reviews

Round Speaker Terminal Cup with Fuse Holder Banana Binding Post
Round Speaker Terminal Cup with Fuse Holder Banana Binding Post is rated 4.75 out of 5 by 4.
Rated 5 out of 5 by from A great upgradeI am rebuilding an old pair of Bose 601's, and I always hated the tiny spring clip connections on the rear. So I bought these, and was fairly I,pressed. It's larger than the original, but I just jig sawed the opening out, and it even comes with a foam seal around it. The fuse holder is great! The speakers had a car roof light as a fuse inside the speaker, so if it blew, you had to pull a woofer to even reach it. So, a 4 amp fuse in the fuse holder and now it's accessible from outside. Plus the screw down 5 way posts are nice, not gold but still nice, much better than the old spring clips, and able to accept real speaker wire connectors on real speaker wires. Spades or bananas, even bare wire, are a cinch. A major improvement to my speaker upgrade project.
Date published: 2014-04-19
Rated 5 out of 5 by from Professional Finishing TouchI like these because they provide a professional finishing touch to DIY speaker build. They allow hooking your speakers up with bare wire, pin connectors, or banana plugs (my preference) and makes a much better connection all-around. It uses standard glass fuses to protect your speakers.
Date published: 2011-10-11
Rated 4 out of 5 by from I'll use these againGood product for the price, does what it says it will do. Terminals for the wires on the inside are a bit flimsy.
Date published: 2008-03-22
Rated 5 out of 5 by from Excellent Productgreat for saving high power speakers from burnout.
Date published: 2007-09-10

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Round Speaker Terminal Cup with Fuse Holder Banana Binding Post

Is the fuse holder removable?

Can the fuse holder be removed so it could be replaced with a variable lpad? If yes, what is the approximate diameter of the hole? Thank you.
Asked by: alrightkid
Yes the fuse holder can be removed however there is limited space on the back of the unit for an L-pad. The fuse is held in place with a nut and glue, the hole diameter is ~5/8" in diameter. The largest diameter L-pad that will fit would have to be 1-1/2" in diameter of smaller.
Answered by: MattP
Date published: 2013-10-21

Can the fuse holder be wired to protect only one driver in a multi-way system? A picture of the rear of the unit would be very helpful.

Asked by: DSP Dude
The fuseholder in this terminal is isoclated from the input terminals themselves and can be wired in line with the whole input, or put in line with any driver of your choice in the design.
Answered by: MattP
Date published: 2013-02-27

DO you Have terminal plates for cerwin Vega AT-15?

Asked by: tempts2006
These and other model terminal plates sold at Parts Express are not made for particular brands or models of speakers. You would have to measure the cut out hole on your speakers, then compare it with the dimensions of the different parts sold here. You may have to cut the hole in the cabinet out to a larger size. The manufacturer of the speakers may have the original replacement, for a higher price!
Answered by: RAK Audio
Date published: 2011-11-30

Customer Projects

Customer projects that include: Round Speaker Terminal Cup with Fuse Holder Banana Binding Post

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software