260-295_ALT_0.jpg
260-295_ALT_0.jpg
 
260-295_ALT_0
 

Round Pressfit Speaker Wire Terminal Cup Spring Type

Brand:| Model: SCT-900R
Overview
Spring loaded, pushbutton speaker terminal in a round housing. No screws required to fasten; simply drill a 1-7/8" hole, apply glue, and press into place. Accepts up to 12 gauge wire. Overall size: 2-3/16" round.
Part # 
260-295
Weight: 0.0528 lbs.  
IN STOCK
List Price$1.19
You Save18%
Your Price
$0.98
Buy 10-49 $0.79
Buy 50-up$0.72
Part # 260-295
Qty:  EA
Available Payment Methods

Product Details

Round Pressfit Speaker Wire Terminal Cup Spring Type

Spring loaded, pushbutton speaker terminal in a round housing. No screws required to fasten; simply drill a 1-7/8" hole, apply glue, and press into place. Accepts up to 12 gauge wire.

Dimensions: • Overall size: 2-3/16" round • Connectors accept 0.205" female disconnect terminals.



Round Pressfit Speaker Wire Terminal Cup Spring Type
  • BrandGoldwood
  • ModelSCT-900R
  • Part Number260-295
  • UPC643420770117
  • Product CategoryTerminal Plates & Cups
  • Unit of MeasureEA
  • Product Rating
    (9 Reviews)
  • Weight0.0528 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Round Pressfit Speaker Wire Terminal Cup Spring Type
in the Terminal Plates & Cups product category.

Reviews

Round Pressfit Speaker Wire Terminal Cup Spring Type
Round Pressfit Speaker Wire Terminal Cup Spring Type is rated 3.7778 out of 5 by 9.
Rated 4 out of 5 by from good fitI bought this for replacing it on my Pioneer speakers - since my old one had one spring broken. Also fitting it...I had to do some filing on the existing hole of the pioneer speakers since the hole was not big enough..so had to file out the wood..for 10-15 mins but after that fits well.
Date published:
Rated 1 out of 5 by from one broke before I got it installedOne broke before I ever got it installed to my good luck never installed. One of the levers to push to put wire in was junk.
Date published: 2014-03-16
Rated 4 out of 5 by from Buy plenty at this priceI needed two of these but bought four because of price and the shipping.Well one was broken when I got them not worth the hassle to return so buy some more then you need.At this price still a good deal.
Date published: 2014-02-07
Rated 5 out of 5 by from inexpensive and functionalBeen using these for several years. They seal up good if you use a forstner type bit. Adequate for most small to medium speaker applications. The flush mount is desirable and allows for tighter wall applications. I Buy in bulk to absorb the shipping costs.
Date published: 2011-12-01
Rated 4 out of 5 by from Speaker terminals. What every box needsAlthough not made of the strongest materials known to man these speaker terminals work great in my subwoofer box.
Date published: 2009-02-03
Rated 4 out of 5 by from With or without siliconeI use this cup on just about all of my small speaker designs. makes a nice seal with a bit of silicone, but still makes a pretty good seal without any sealant.
Date published: 2008-01-13
  • 2015-03-03T07:05CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_260-295, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Round Pressfit Speaker Wire Terminal Cup Spring Type

What is the depth of this item and the 260-296 (square one).  Need to fill the hole cheaply but don't have a lot of depth.

Asked by: Falkner35
Total depth without terminals is 3/4", with terminals is 1" however these can be cut off.
Answered by: MattP
Date published: 2013-12-05

Does this speaker terminal cup come with the little red and black wire that connect to the subwoofer driver/unit?

The red and black wire inside my sub that connects to the driver/unit broke, so I need to replace it. Does that come with this item?
Asked by: killermike2178
This does not come with the wiring. The back of this has 3/16 solder tabs that you could connect the wire to .
Answered by: Chrisf
Date published: 2012-10-26

i have some dual banana jacks that fit in a few spring loaded terminal cups. would they fit in these or any other spring loaded terminal you sell?

Asked by: dBAudio
On this terminal cup, the hole spacing does match the banana plug you referenced, however, the holes are not large enough to accommodate a standard banana plug. You will find that this applies to all our spring-loaded terminals of this type. For banana plug connections, I would suggest utilizing a binding post cup, rather than the spring-loaded variety.
Answered by: RussR
Date published: 2012-02-28
  • 2015-03-03T08:29CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_260-295, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: Round Pressfit Speaker Wire Terminal Cup Spring Type

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1996-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software