Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Rotary Switch 2 Pole 6 Position Non-Shorting
Hi, can I use that rotary selector switch to select sources like phono, CD, tuner, etc... If not, what would you recommend. Thanks.
Unfortunately this switch will not work for an application like this. You will need a 4PDT rotary type which we do not have. You may want to try www.mouser.com or www.digikey.com for other possible switch options.
Date published: 2014-05-05
What is the shaft diameter
The shaft diameter is 6mm.
Date published: 2013-09-13
12VDC @ 5-10 AMPS?
I was wondering if this can take 12v dc at 5 to 10amps. Or will that kind of power burn this switch up?
this is an AC rated switch and not intended for DC applications. An AC signal changes directions and is at 0 voltage for a portion of the cycle. This means the switch requirements are much lower than a direct current switch in terms of heat.
Date published: 2013-08-20
Do you offer extra nuts for panel depth spacing?
If not, can you tell me what the nut dimensions are, (thread, diameter, thickness)
Unfortunately we only offer the nuts with the potentiometers. The thread diameter is 8.5mm.
Date published: 2012-10-29
No, this switch is not adjustable stop.
Date published: 2011-04-18