Rolls XLM113 XLR Male to Screw Terminal Adapter

Brand:| Model: XLM113
The XLM113 is an XLR to bare wire adapter that will save the day for you or your customers when you need it. We've all been in a situation where we needed one of these. Now you need wish no longer. Stock up now.
  • Adapts XLR to bare wire terminals
  • Small form factor
  • Handy and affordable
  • Also available with female XLR
Part # 
Weight: 0.05 lbs.  
List Price$12.00
You Save26%
Your Price
Buy 10-49 $8.65
Buy 50-up$8.25
Part # 245-1190
Qty:  EA
Available Payment Methods

Product Details

Rolls XLM113 XLR Male to Screw Terminal Adapter

The XLM113 male XLR to screw terminal adapter should be present in the toolkit of any serious audio installer. You can use regular pro audio gear in custom installations with only bare wires out of the wall, make on-the-fly repairs, and so much more. Using this product, you have the advantages of screw terminals and standard jacks with the disadvantages of neither. And, being as affordable as they are, you can keep several on hand to be prepared for any situation that might arise. Also available in female XLR configuration. Made in the USA.

For more than two decades, those in the know have turned to Rolls for the highest quality, reliability, and value. Rolls is an innovative company specializing in domestically manufactured signal interface accessories, mixers, amplifiers, and processors for the audio professional.

Rolls XLM113 XLR Male to Screw Terminal Adapter
  • BrandRolls
  • ModelXLM113
  • Part Number245-1190
  • UPC675889011302
  • Product CategoryXLR Connectors
  • Unit of MeasureEA
  • Product Rating
    (1 Reviews)
  • Weight0.05 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Rolls XLM113 XLR Male to Screw Terminal Adapter
in the XLR Connectors product category.


Rolls XLM113 XLR Male to Screw Terminal Adapter
Rolls XLM113 XLR Male to Screw Terminal Adapter is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Neatest gadget in your audio toolboxAnyone who works with XLR audio knows how hard it is to solder those little pins on a plug or jack. Especially when working on a location. You don’t want to short out 48 volts of phantom power either. The pin-out doesn't always follow an XLR protocol for hot, cold and ground. Get it wrong, and you have to unsolder, re-install and re-solder. Very time-consuming and frustrating. However, the screw terminals on this gadget take the pain out of trial and error. Also make testing with a toner and probe easy. When you get it right, transfer the connection to a regular solder or slip-on connection and finish the job. Or leave it the way it is.
Date published: 2014-08-18
  • 2015-03-29T06:51CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_245-1190, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Rolls XLM113 XLR Male to Screw Terminal Adapter

Customer Projects

Customer projects that include: Rolls XLM113 XLR Male to Screw Terminal Adapter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software