Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Rolls VP29 Phono Preamp
I need to plug my turntable (standard mm cartridge) into the CD or AUX. input of my amplifier. Will this provide enough voltage to drive the amp properly?
I have a vp29 that has been flawless for approximately 4 months. Suddenly tonight I am not getting sound from one of my front speakers. When I switch to another channel such as tuner the speakers work. I have checked it on multiple records, same loss
Please contact our tech support for more help with this question, email@example.com or 800-338-0531 x1.
Date published: 2014-08-14
I have a harmon kardon avr 700 receiver and a dual cs 505-4 turntable with a shure v-15 mm cartridge. Will I be able to utilize the rolls vp29 with this configuration?
If the turntable only has a phono output and the receiver does not have a dedicated phono input, this preamp is what you will need in order for it to work properly with that receiver.
Date published: 2014-09-06
Will this work with a FR3060 Turntable?
this should work fine with that turn table. It appears to use standard cartridges so there is not problems that i can see.
Date published: 2014-06-03
Right pre-amp for Record Player?
I have an Record Player which has the usual red/white RCA cable output. It has a small volume knob on the back of the record player, but no other control for sound level or quality. I'm looking for the right Pre-amp and system so that I can amplify the sound to the speakers with a good RIAA curve, but I'd also like something where I can control the volume better...maybe from the pre-amp?If the Rolls VP29 Phono Preamp the right product or should I consider a different set up?
Question 1: What type of output does your phono put out? Some models have an internal pre-amp. If it has a volume knob, than this might be the case. (It is an extremely unusual feature.) There are many dozens of ways to lay out a system. I can't help you more without a better idea of what you actually have. The complete signal path is something like:cartridge --> MC step-up (if required) --> RIAA --> volume control --> pre-amp (optional --> crossover (if active and required) --> amplifiers --> crossover (if passive and required) --> speakers.The most obnoxious way to solve all that is to take a turntable with a built-in pre-amp and connect it directly to a pair of active speakers, such as a set of computer speakers and call it a day. =P
Date published: 2014-09-06