091-1265_ALT_1.jpg
091-1265_ALT_1.jpg
 
091-1265_ALT_0
 
091-1265_ALT_1
 

RCA Connector Solder Type 2-Pair

Overview
These connectors are designed with the audiophile in mind. 24 kt gold plating ensures the highest possible signal transfer and resists harsh environmental corrosion. These precision-machined connectors are made to last and last.
Highlights
  • 6.5mm cable entry accepting up to 16 ga. Wire
  • 24 kt gold plating ensures the highest possible signal transfer and resists harsh environmental corrosion
Part # 
091-1265
Weight: 0.25 lbs.  
IN STOCK
List Price$23.99
You Save44%
Your Price
$13.50
Buy 10-99 $12.75
Buy 100-up$9.80
Part # 091-1265
Qty:  PK
Available Payment Methods

Product Details

RCA Connector Solder Type 2-Pair

2-red, 2-black RCA connectors with 6.5 mm cable entry accepting up to 16 ga. wire. These connectors are designed with the audiophile in mind. 24 kt gold plating ensures the highest possible signal transfer and resists harsh environmental corrosion. These precision-machined connectors are made to last and last.  These connectors have been designed to allow your systems to reach their fullest potential!

Specifications: • Contact plating: gold • Shell material: brass • Finish: black • Sold per: 2 pairs • Entry hole: 6.5 mm • Termination style: solder • Dimensions: 0.4" x 1.9"



Product Specifications
  • GenderMale / Plug
  • Mounting TypeCable Mount
RCA Connector Solder Type 2-Pair
  • BrandParts Express
  • Part Number091-1265
  • UPC844632014185
  • Product CategoryRCA Connectors
  • Unit of MeasurePK
  • Product Rating
    (8 Reviews)
  • Weight0.25 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the RCA Connector Solder Type 2-Pair
in the RCA Connectors product category.

Reviews

RCA Connector Solder Type 2-Pair
RCA Connector Solder Type 2-Pair is rated 4.5 out of 5 by 8.
Rated 5 out of 5 by from Very nice but to priceyWorks really well. Solder up super easy if you flux everything. The color coded rubber sleeves should be permanent. Entrance hole on body should be offered in 2 sizes. I am using Horizon PRO Studio bulk cable to make my own. Have to push and cork screw body on cable to strip cable , then solder , then push and twist body to make a unit. Most of the locking type RCA's may offer larger cable sizes , but do not like how they solder up , plus makes for tight quarters locking them. PE would sell MORE of thees if lowered price. Next set of cables I build I will just drill the hole open a scotche and quit fighting it. Other than PRICE very satisfied.
Date published: 2012-02-21
Rated 5 out of 5 by from Great valueSome very decent connectors.Easy to solder, solid connection, nice appearance.I would recommend these to anyone looking for a quality RCA connector at a fair price.
Date published: 2010-04-02
Rated 4 out of 5 by from Nice but too expensiveThese are well designed non-boutique RCAs. They have a nice heavy feel and decent construction.The solder up nicely and can also hold sheathing with the crimp for a finished look.Only complaint is at almost $20.00 a set and made China there must be close to 1000% mark up on them. Come on guys, give us a break!
Date published: 2010-01-31
Rated 5 out of 5 by from Great connectorWhen comparing it to the Monster PL2-B Phonolink 2, this item is far superior. It has a hole in the strain-relief part with the cup on the OUTSIDE, making the solder a breeze. The unit is slightly longer which also makes it easier to work with. The ground plates are not too tight like the Monster. Also, the aluminum jacket with the rubber is easy to grip and twist.
Date published: 2009-07-19
Rated 4 out of 5 by from Solid build, preciseVery hefty and a pretty good value compared to higher-priced exotic stuff. Easy to solder, but as with any connector, don't over-heat and melt the plastic insulation around central pin.
Date published: 2008-11-06
Rated 5 out of 5 by from Excellent Connector ValueI use these connectors to make custom length subwoofer cables for clients. They are high quality, easy to install and silver solder, easy to bond shield to either end under strain relief. The connectors are made well and fit snug when installed.
Date published: 2008-10-19
  • 2015-05-29T07:56CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_091-1265, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
RCA Connector Solder Type 2-Pair

are these suitable for connecting 16 gauge wire for bose v35 system 

Asked by: maddy
Yes these will accept up to 16 gauge wire.
Answered by: MattP
Date published: 2009-08-07
  • 2015-05-29T10:30CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_091-1265, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: RCA Connector Solder Type 2-Pair

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software