Quest FWH-12411 Surface Mount Raceway 1" x 48"  White

Quest FWH-12411 Surface Mount Raceway 1" x 48" White

Brand:| Model: FWH-12411
Product Video
Overview
The wirehider non-metallic surface mount 1" x 48" raceway was designed with the installation professional in mind.
Highlights
  • Adhesive foam tape for fast and easy installation
  • Constructed of flame retardant PVC
  • Visual cable identification
  • Can be painted to match any decor
Part # 
261-202
Weight: 0.3 lbs.  
IN STOCK
Your Price
$5.60
Buy 6-up$5.32
Part # 261-202
Qty:  EA
Available Payment Methods

Product Details

Quest FWH-12411 Surface Mount Raceway 1" x 48" White
The wirehider non-metallic surface mount 1" x 48" raceway was designed with the installation professional in mind. WireHider was designed to eliminate the problem of hard to install locations where the cable has a tendency to fall out, especially on ceiling runs. This raceway duct speeds up installation by enabling you to simply push the cables into its flexible center slit and it allows you to exit anywhere along the run without the concern of the cable falling out. No raceway covers are required, but are available as an aesthetically pleasing option.


Quest FWH-12411 Surface Mount Raceway 1" x 48" White
  • BrandQuest Technology
  • ModelFWH-12411
  • Part Number261-202
  • UPC859241000023
  • Product CategoryCable Raceway
  • Unit of MeasureEA
  • Product Rating
    (1 Reviews)
  • Weight0.3 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Quest FWH-12411 Surface Mount Raceway 1" x 48" White
in the Cable Raceway product category.

Reviews

Quest FWH-12411 Surface Mount Raceway 1" x 48" White
Quest FWH-12411 Surface Mount Raceway 1" x 48" White is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Excellent aesthetic improvementThe Quest raceway system offers an effective, straightforward and reasonably affordable way to significantly upgrade your room aesthetics by concealing exposed Audio Video cabling. This is great way to improve the SAF "spouse acceptability factor" of the AV system--an important benefit.The "Raceway" uses adhesive backing to attach to the wall. You simply need a 3-4ft straight edge and 2-4ft level to layout the ideal raceway path. Its a good ideal to "dry-fit" the system together (including any covers, tees, rightangles or corners) before removing the adhesive backing. The adhesive is aggressive and cannot be readily removed and re-attached.The installation can sound complex in words, but I found installation very intuitive, so while detailed instructions would have been helpful, installers should be able to install the system without detailed instructions.
Date published: 2011-09-23

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Quest FWH-12411 Surface Mount Raceway 1" x 48" White

The answer to the question about the depth is confusing: Judging from the raceway being 'on the wall horizontally' or viewing it as a cutout from the wall to the outside of the mounted raceway), is the 'Height=1 inch' and the 'Depth=.5 inch?' Thanks ;-)

Asked by: CritiKiL
If mounted horizontally it it would be 1 inch high. Essentially it will extend from the wall 1/2 inch and the height or width depending on orientation would be 1 inch.
Answered by: Chrisf
Date published: 2014-09-27

Are these raceways paintable?

Curious if these can be painted to match the color of the wall.
Asked by: CB01
Yes, they are. Per the highlights in PE's web page:Highlights•Adhesive foam tape for fast and easy installation•Constructed of flame retardant PVC•Visual cable identification•Can be painted to match any decor
Answered by: platoindy
Date published: 2013-04-11

How deep is the channel?

Your discription indicates 1" x 48'. If the width is 1", what is the depth? This is needed to figure out the size and quantity of cables that can be enclosed in the channel. For instance, would the 1/2" wide channel be enough to run 2 sets of speaker wire?
Asked by: msen
The Quest 1" Raceway Inside Dimensions: 1.085 in W x 0.545 H.The 3 different widths are as follows:1/2 in Inside Dimensions: 0.475 in. W x 0.475 in H1 in Inside Dimensions: 1.085 in W x 0.545 H1.5 in Inside Dimensions: 1.4 in W x 0.687 H
Answered by: platoindy
Date published: 2014-11-24

Videos

Customer Projects

Customer projects that include: Quest FWH-12411 Surface Mount Raceway 1" x 48" White

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1