The CMX500V is based upon the proven, rock-solid, reliable performance found in the award winning RMX Series. The CMX feature sets are designed for wide-ranging application in facilities such as performance halls, houses of worship, sports clubs, gymnasiums, dance venues, pubs, and FGM/BGM systems. The CMX Series provides unmatched performance, the right power for the job and an affordable price point. CMX amplifiers incorporate everything QSC has learned in more than forty years of striving to deliver worry-free operations without failures. The design of these amplifiers starts with our world-class power supplies. The CMX uses a powerful, high-current toroidal transformer and filtering to ensure generous energy reserves. This allows the amplifiers to effortlessly handle high-level transients, even when driving abusive 2 ohm speaker loads. The amplifier output sections feature rugged class AB and class H architecture depending on power level.
All CMX amplifiers are protected from damage from shorted outputs. Automatic current limiting protects the amplifier from damage until the short is corrected. CMX amplifiers also feature DC protection systems to prevent loudspeaker damage in the unlikely event of an output transistor failure. DC voltage from the power supply is never passed directly to your speakers, even in the event of an output circuit failure.
The CMX amplifiers deliver true and accurate studio-quality sound. A full complementary output circuit using high-grade linear output devices generates accurate, flat-frequency response with low distortion. SMT (Surface Mount Technology) triples small-signal component density, enabling high power output in a 2 rack unit chassis. Unlike other designs, CMX output devices are directly mounted to the heat sink for optimum thermal coupling and cooling.
The V in the model name designates the ability to directly drive 70Vand/or 100V distributed loudspeakers. The CMX500V must be configured for bridged-mono operation in order to directly drive high-impedance systems.
For installations requiring a transformer isolated output, the CMX has optional accessories to cover your needs.
Specifications: • Power output* (stereo mode, both channels driven): 300 watts x 2 (8 ohms); 500 watts x 2 (4 ohms); 700 watts x 2 (2 ohms) • Power output (bridge mono mode): 900 watts x 1 (8 ohms); 1,400 watts x 1 (4 ohms); 1,200 watts x 1 (70V direct drive); 600 watts x 1 (100V direct drive) • Signal to noise (20 Hz-20 kHz, 8 ohms): ≥100 dB • Input sensitivity @ 8 ohms: 1.15V (+3.4 dBu) • Voltage gain @ 8 ohms: 40x (32 dB) • Output circuitry: Class AB • Input impedance: 10k ohms unbalanced, 20k ohms balanced • Power requirements: 100, 120, 230 VAC, 50/60 Hz • Dimensions: 3.5" H x 19" W x 15.9" D (8.9 x 48.3 x 40 cm) • Weight: 40 lbs. (18.2 kg).
*Continuous average output power per channel