270-102_ALT_0.jpg
270-102_ALT_0.jpg
 
270-102_ALT_0
 

Manuals & Resources

Pyramid TW18BK Bullet Horn Super Tweeter Pair Black

Brand:|Model: TW18BK
*3-3/4" aluminum bullet horn with 1" super tweeter *Ferrofluid cooled voice coil *Includes crossover capacitor *Black color (also available in natural aluminum) *Sold in pairs
In Stock
List Price$44.99
You Save67%
Your Price
$14.88
Buy 4+$14.25
Part # 270-102
Share:
Highlights
  • 3-3/4" aluminum bullet horn with 1" super tweeter
  • Ferrofluid cooled voice coil
  • Includes crossover capacitor
  • Black color (also available in natural aluminum)
  • Sold in pairs

Product Details

Pyramid TW18BK Bullet Horn Super Tweeter Pair Black

This 3-3/4" aluminum bullet horn with 1" super tweeter features a ferrofluid cooled voice coil and includes a crossover capacitor. Black color, but also available in natural aluminum.

Specifications: • Power handling: 60 watts RMS/120 watts peak • VCdia: 1" • Impedance: 4 ohms • Frequency response: 2,000-25,000 Hz • SPL: 93 dB 1W/1m • Magnet weight: 20 oz. • Dimensions: 3-3/4" diameter x 1-1/2" depth • Cutout: 2-7/8" (notches required for terminals) • Sold in pairs.



Product Specifications
  • Tweeter TypeHorn
  • Impedance4 ohms
  • Power Handling (RMS)60 Watts
Pyramid TW18BK Bullet Horn Super Tweeter Pair Black
  • BrandPyramid
  • ModelTW18BK
  • Part Number270-102
  • UPC068888706308
  • Product CategoryCar Audio Tweeters
  • Unit of MeasureEA
  • Product Rating
    (9 Reviews)
  • Weight2.71 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Pyramid TW18BK Bullet Horn Super Tweeter Pair Black
in the Car Audio Tweeters product category.

Reviews

Pyramid TW18BK Bullet Horn Super Tweeter Pair Black
Pyramid TW18BK Bullet Horn Super Tweeter Pair Black is rated 4.0 out of 5 by 9.
Rated 5 out of 5 by from VERY GOOD TWEETERSI LOVE THEM, HAD THEM FOR A MONTH NOW AND STILL NO TROUBLE AT ALL.
Date published: 2013-08-23
Rated 5 out of 5 by from Great tweeters for home audio...These are great tweeters at any price, detailed, never harsh, very musical and they really sort out the high frequency information. They handily beat my expensive Fostex tweeters that cost over 6 times the price. BTW, they are 4.8 ohms impedence as it says on the back, not 4 ohms as it states in the specs. Also they are about 100dB sensitivity by my estimation, not 93 dB as they state. I had to L-pad them down about 4.5 dB. Get a good poly cap for them for best performance.
Date published: 2013-02-03
Rated 1 out of 5 by from distortedI ran 2k-20k test sweeps through these tweeters, and I heard a lot of buzz. THD of 1-10% at 1 watt, including high order harmonics. The SPL was about 87db @ 1w/1m. I thought I had a defective one, but they were both about the same. I tried both with and without the included capacitor, and got a different response curve but simlar distortion results. Maybe they sound better at higher volumes, but I did not get that far. They were sent back for a refund.
Date published: 2012-02-16
Rated 5 out of 5 by from Excellent tweeter for both PA and HifiI put these tweeters in a 12" 2-way speaker pa set I built. In PA use, in large spaces they project and cover large areas as well as a traditional wide-lens PA horn seen on most pa mains, making them perfect if you are going for a compact design. They are very SPL efficient, and may need to be knocked down with resistors or an L-pad in most installations. To my surprise the response from then at all volumes, even low is surprisingly crisp and flat, with little no honky fatigue of many PA horn tweeters making them quite decent for HIFI listening too. best of all they come in pairs.
Date published: 2011-01-06
Rated 5 out of 5 by from Awesome Value!Nothing bad to say about these; they work and sound great and your staff is most helpful and I got my order in 3 Days! Will do more biz with Parts Express!
Date published: 2009-06-28
Rated 3 out of 5 by from Not quiteFirst off the pair of tweeters that i received were not the same as shown in the photo. There is bright red lettering around the face that makes them look mickey mouse. So if you are going for cosmetics the photo is not the same as the product. The specs and parameters are as advertised and the tweeters themselves don't sound bad. I have purchased other less expensive Dayton tweeters that I would rate higher than these.
Date published: 2008-07-22
  • 2015-09-02T07:12CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_270-102, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pyramid TW18BK Bullet Horn Super Tweeter Pair Black

If I have an EQ and a crossover in my system already would I need to keep the cap in or remove it? and where should I set my cross over at? thanks

Asked by: metalhead27
No, you will not need the capacitor and I would recommend setting the cross over point at least at 3.5 to 4 KHz.
Answered by: MattW
Date published: 2015-04-01

where does the includes cap cross these over at?? i need a crossover in the 13kHz range

Asked by: speakerfreack
The capacitor included would provide a crossover of about 12,000 Hz.
Answered by: MattP
Date published: 2014-05-09

You list 60 watts RMS. Is that per speaker or per pair?

Asked by: djjimus
This is the rating per speaker.
Answered by: MattP
Date published: 2014-05-09

I AM NEEDING TO INSTALL THESE IN MY 2 WAY PRO MINTORS FOR MY BAND. I HAVE ZERO KNOWLEDGE ON THE WAY TO TIE THEM INTO EACH MONITOR AS A REPLACEMENT.

i HAVE ZERO KNOWLEDGE NOR THE SKILLS TO COMPREHEND A SCHEMATIC. THERE ARE CURRENTLY NO CROSSOVERS IN THE CABS. THEY ARE 10" WEDGE MONITORS. CAN I USE THE CAPACITOR THAT COMES WITH EACH TWEETER OR DO I NEED TO BUY AN ADDITIONAL CROSSOVER BOARD FOR EACH CAB?
Asked by: MERL
Very simple; just disconnect your current tweeter from the wires, reconnect the replacement tweeter. If the current one is soldered, cut the wires right at the tweeter terminals, strip the ends enough to solder them to the new tweeter or enough to crimp female quick-disconnect connectors on them. If using the connectors, just make sure you connect the wire with the capacitor to the new tweeter + terminal. Done quick as that!
Answered by: ThaiBoxing101
Date published: 2014-05-09
  • 2015-09-02T08:22CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_270-102, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1986-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software