300-218_ALT_2.jpg
300-218_ALT_2.jpg
 
300-218_ALT_0
 
300-218_ALT_1
 
300-218_ALT_2
 

Pyramid PA Paging Amplifier 100W Rackmount

Brand:| Model: PA305
Overview
The Pyramid PA305 rack-mountable PA amp has the power and features that make it a great choice for a variety of public address and paging applications.
Highlights
  • For lecture halls, auditoriums, offices, and houses of worship
  • 100 watts RMS, 300 watts peak output power
  • Four microphone inputs (1/4"/XLR) with separate level controls
  • Mix Bus connection stacks two units for system expansion
  • 4, 8, and 16 ohm outputs, plus 70 volt line output
  • Output meter plus clipping and protection LEDs
  • Adjustable feedback notch filter increases system's effective volume
Part # 
300-218
Weight: 26.35 lbs.  
IN STOCK
List Price$415.99
You Save59%
Your Price
$167.88
Part # 300-218
Qty:  EA
Available Payment Methods

Product Details

Pyramid PA Paging Amplifier 100W Rackmount

For reliable power and great features, all in a rack-style case, the Pyramid PA305 amp is hard to beat! This 100 watt PA amplifier is well suited for lecture halls, larger auditoriums, office buildings, and houses of worship. With quality features such as a frequency response up to 60-25,000 Hz, less than 0.05% THD, and adjustable feedback notch filter, this amp really competes with higher-priced models.

The PA305 features four microphone inputs (1/4"/XLR) with separate level controls (Mic 4 can be switched for a Phono input), separate CD/Aux input, and a unique Mix Bus connection for stacking two of these units in line to expand your system as needed. Spring loaded speaker terminals are provided with 4, 8, and 16 ohm outputs, plus a 70 volt line output. Includes master volume control, precision lighted VU meter, clipping and protection LEDs, and headphone jack. Power output: 100 watts RMS (2% THD, 8 ohm load @ 1 kHz), 300 watts peak. Dimensions: 4.2" H x 19" W x 11.94" D.



Product Specifications
  • Power Output (RMS @ 70V)25W to 50W
  • Weight Range20 to 29 lbs.
Pyramid PA Paging Amplifier 100W Rackmount
  • BrandPyramid
  • ModelPA305
  • Part Number300-218
  • UPC068888883955
  • Product CategoryPaging & Commercial 70V Mixer-Amplifiers
  • Unit of MeasureEA
  • Product Rating
    (9 Reviews)
  • Weight26.35 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Pyramid PA Paging Amplifier 100W Rackmount
in the Paging & Commercial 70V Mixer-Amplifiers product category.

Reviews

Pyramid PA Paging Amplifier 100W Rackmount
Pyramid PA Paging Amplifier 100W Rackmount is rated 4.3333 out of 5 by 9.
Rated 4 out of 5 by from Good bang for the buckBought this looking for a cheap replacement to run a few horns at a local baseball field. Not a bad integrated amp. To do better you may end up spending 3x the money. Price point vs power is the major pro. I did find a few cons though. First, it playes music good enough but the mic inputs seem to have very little headroom. An animated announcer will easily find himself in the clipping range. Second, the auto ducker on the first mic channel also adds some noise. Not bad but still noticeable. This only effects the fist mic input however.
Date published: 2013-07-21
Rated 4 out of 5 by from Pyramid PA305I selected the Pyramid PA305 for an installation in a mid-sized venue. They do some meetings and poetry readings, etc. They also do occasional large music events that I usually mix with a carry in system.The Pyramid PA305 works great, lots of power to drive two two-way 10"/4X10 horn cabinets. The ability to mix four mike inputs makes it flexible enough. The CD/Aux input offers them the ability to do background or foreground music from a wide range of sources.A minor drawback: the auto dunking of the CD/Aux input when there is signal on the mike one input works, but would work better if it had a time delay response. As one is speaking, music returns to full level on every breath or pause.
Date published: 2013-05-30
Rated 5 out of 5 by from Excellent addition to our sound systemJust bought this to power a few speakers in our classroom. Definitely going to get another one for our other classrooms.
Date published: 2013-04-02
Rated 2 out of 5 by from Good while they workThis is a nice solid amp that gets the job done for not much money. However . . . when they die, there are no schematics to repair them and Pyramid does not even reply to support emails. You need to determine if you want to buy disposable amps.
Date published: 2011-08-26
Rated 5 out of 5 by from Super value and sounds great!I'm using this with a Sonos system driving 10 TIC outdoor speakers. Wow...it sounds awesome. Super easy set up with the 70V output. Couldn't be happier.
Date published: 2010-05-11
Rated 4 out of 5 by from good productI am using it in our nursery speakers in our church. very good amp for that app.
Date published: 2008-03-31

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pyramid PA Paging Amplifier 100W Rackmount

can I connect 8 ceiling speaker to this unit and how.?

Asked by: desk
This is a 70 volt amplifier so as long as they are also 70 volt speakers with matching transformers, you would just connect them in parallel and tapped at no more than 10 watts each.
Answered by: Chrisf
Date published: 2014-04-12

When 2 units are connected with mix bus, does it really double the power?

Also, does a mic plugged into one unit work through both? Finally, should the speakers be split between the 2 units in a 70-volt configuration?
Asked by: bclarke675
You cannot get more power than the amplifier is rated for. Depending on the source, it is possible to get a slight boost of input sensitivity using two inputs as opposed to one but this does not change the output power.
Answered by: MattP
Date published: 2013-04-17

Customer Projects

Customer projects that include: Pyramid PA Paging Amplifier 100W Rackmount

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1