free shipping at parts express
Pyle PPSJ50 12 AWG Speakon to 1/4" Speaker Cable 50 ft.

Manuals & Resources

Pyle PPSJ50 12 AWG Speakon Type to 1/4" Speaker Cable 50 ft.

Brand:|Model: PPSJ50|Part # 248-4622
The PPSJ50 by Pyle Pro is a 50 ft. 1/4" to speakon-type speaker cable.
In Stock
List Price$48.99
You Save64%
Your Price
Buy 4+$16.69
Part # 248-4622

Product Details

Pyle PPSJ50 12 AWG Speakon Type to 1/4" Speaker Cable 50 ft.

Pyle Pro PPSJ50 1/4" to speakon-type speaker cable is 50 feet of pure speaker cable bliss. 12 gauge professional grade.

Product Specifications
  • Cable Type1/4" TS to NL4 speakON
  • Wire Gauge12/2 AWG
  • Cable Length50 ft.
Pyle PPSJ50 12 AWG Speakon Type to 1/4" Speaker Cable 50 ft.
  • BrandPyle Audio
  • ModelPPSJ50
  • Part Number248-4622
  • UPC068888897365
  • Product CategorySpeaker Cables
  • Unit of MeasureEA
  • Product Rating
    (7 Reviews)
  • Weight2.9 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Pyle PPSJ50 12 AWG Speakon Type to 1/4" Speaker Cable 50 ft.
in the Speaker Cables product category.


Pyle PPSJ50 12 AWG Speakon Type to 1/4" Speaker Cable 50 ft.
Pyle PPSJ50 12 AWG Speakon Type to 1/4" Speaker Cable 50 ft. is rated 3.0 out of 5 by 7.
Rated 3 out of 5 by from wire type and sizeThese are working fine for my use. I just wanted to make anyone else looking at these cables aware that they are somewhere between 16 & 14ga and they use CCA or copper clad aluminum wire.
Date published: 2015-04-19
Rated 1 out of 5 by from Wire is not 12ga and poor qualityI bought this particular set and the set with the 2 speakon connectors thinking I can use them for long runs. However, the 2 wires (copper condutors) are not really 12ga as claimed. They are more like 14ga and the copper strands are poor quality (copper not shiny like good copper should be). Therefore, don't expect too much out of this "low cost" cable made in China. After using it for one gig, I cut up the speakon connectors and kept them for future use. The wire I threw away...
Date published: 2015-02-28
Rated 1 out of 5 by from Really Poor Qualiy ControlI bought a pair of these cables to a) replace zip cord monitor cables, and b) save myself the work of building from parts. Big mistake.Here are my beefs:1) They looked dusty/dirty with scuff marks like they were used, but were in a factory sealed package.2) There were open circuits on the Speakon ends of BOTH cables. They tinned the wires and inserted them into screw down terminals on the Speakon ends. I always thought this was a no-no because it creates a brittle point and, guess what? The red wire on one and the white wire on the other one were sheared off = open circuit X2.3) The 1/4" ends were solder-bridge-shorted and had cold solder joints on BOTH cables. I figured that if the Speakon ends messed up, I better check the 1/4 ends to, and sure enough, the sloppiest soldering I have ever seen.In the end, I completely re-wired all four ends.I will admit, that now the cables are wired correctly, they work fine. But the reason I paid for pre-built cables was to let someone else do the grunt work. Joke is on me. Buyer beware.
Date published: 2014-07-12
Rated 4 out of 5 by from Great valueQuality connectors, correct length, perfect for those on a budget.
Date published: 2014-04-04
Rated 4 out of 5 by from Good dealThis is the second set of these 50 ft. cables I have purchased. We use one set for our large 3000W rack system - with no issues after 2 seasons of gigging with them. We bought a second set to use with a small powered mixer we use for acoustic gigs. So far, no issues - they work exactly as advertised. Decent quality connectors. No hum or distortion.
Date published: 2013-02-22
Rated 4 out of 5 by from Good qualityBuilt right and works great. I bought two and have no issue's with them.
Date published: 2013-02-22
  • 2016-04-30T06:27CST
  • bvseo_cps, prod_bvrr, vn_cps_3.2.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_248-4622, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Pyle PPSJ50 12 AWG Speakon Type to 1/4" Speaker Cable 50 ft.

What is the outside diameter of the jacket? 

Asked by: johnnyrichards
The outer diameter of the jacket on this cable is 8mm.
Answered by: MattP
Date published: 2015-01-05

Speak on connector - 4 conductors?

I need to confirm that this is a 4 conductor Speakon and that I can switch the wires on the Speakon connector. I have a crown amp that when in bridge mode requires a NL4 and both wires us both + and no negatives.
Asked by: Jim Noble
This does use a 4 pole speakon connector that can be modified.
Answered by: MattP
Date published: 2013-04-05
  • 2016-04-30T06:47CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_248-4622, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software