free shipping at parts express

Manuals & Resources

Pyle PLMRW8 8" 400 Watt 4 Ohm Marine Subwoofer White

Brand:|Model: PLMRW8|Part # 292-2634
Be prepared to be blown out of the water with Pyle's 400 watt Hydra 8" subwoofer.
In Stock
List Price$66.99
You Save63%
Your Price
Buy 4+$24.00
Part # 292-2634

Product Details

Pyle PLMRW8 8" 400 Watt 4 Ohm Marine Subwoofer White

The PLMRW8 marine subwoofer is constructed from water resistant plastic, supporting a 8" high quality polypropylene cone. The 40 oz. magnet structure and 1.5" high temperature voice coil boom with power and achieve a frequency response of 35 Hz to 3.5 kHz.

Specifications: • Cone: 8'' High quality polypropylene • Design: Water resistant construction • Magnet structure: 40 oz. • Voice coil: 1.5" High temperature • Power: 400 watts peak • Frequency response: 35-3.5 kHz • Impedance: 4 ohms • Sensitivity: 91 dB • Overall diameter: 8.5" • Mounting Depth: 3.60".

Product Specifications
  • Speaker TypeSubwoofer
  • Speaker Size8"
  • Power Handling (RMS)200 Watts
Pyle PLMRW8 8" 400 Watt 4 Ohm Marine Subwoofer White
  • BrandPyle Audio
  • ModelPLMRW8
  • Part Number292-2634
  • UPC068888880954
  • Product CategoryMarine Speakers
  • Unit of MeasureEA
  • Weight4.55 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Pyle PLMRW8 8" 400 Watt 4 Ohm Marine Subwoofer White
in the Marine Speakers product category.


Pyle PLMRW8 8" 400 Watt 4 Ohm Marine Subwoofer White

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Pyle PLMRW8 8" 400 Watt 4 Ohm Marine Subwoofer White

Does this subwoofer need it's own amplifier to work correctly or can it be wired directly to the marine stereo?

Asked by: irish
You will get the most from this subwoofer by giving it its own amplifier. Powering it off the head unit will not provide much output before the head unit starts clipping.
Answered by: MattP
Date published: 2015-07-01

Has anyone had a chance to run the T/S numbers on this sub yet? If so, might you recommend a sealed box size for it? TIA

Asked by: Processguy
The recommended sealed box for this woofer will be anything from 1 to 1.8 cubic feet. The larger the cabinet, the more low end efficiency you will get at the expense of power handling. You can expect an F3 of 48-50 Hz.
Answered by: MattP
Date published: 2015-07-01

What is proper sealed box size for this sub? What is a good vented box for it also?

Asked by: Processguy
Unfortunately we cannot model a woofer without the proper T/S specs. Once this woofer comes in stock we will be able to measure it and provide box volumes.
Answered by: MattP
Date published: 2015-07-01

What is the cutout mounting hole for this subwoofer?

Asked by: Serg
Most new speakers come with a template in the box, so you unfold the paper template and mark your hole to cut it out.You never want to cut holes in your baffles before you get your speakers. And after tracing the holes with the speaker or the template, put the speakers away in thier boxes or another room so they dont get saw dust all over them.
Answered by: Fanden
Date published: 2015-07-01
  • 2016-04-29T07:02CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_292-2634, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software