Pyle PLG3.2 3-1/2" Coaxial Speaker Pair

Pyle PLG3.2 3-1/2" Coaxial Speaker Pair

Brand:| Model: PLG3.2
Overview
Specifications: Impedance: 4 ohms. Frequency response: 100-20,000 Hz. Power handling: 60 watts RMS/120 watts max per pair. Mounting depth: 1-3/4".
Highlights
  • Yellow color poly injected cone
  • Non-fatiguing butyl rubber surround
  • High temperature aluminum voice coil
  • Rubber boot magnet cover
  • One-year manufacturer's warranty
Part # 
267-716
Weight: 2.4001 lbs.  
IN STOCK
List Price$39.99
You Save61%
Your Price
$15.56
Part # 267-716
Qty:  PR
Available Payment Methods

Product Details

Pyle PLG3.2 3-1/2" Coaxial Speaker Pair

Standard 3-1/2" size fits OEM locations. Features a poly injected yellow cone, high temperature aluminum voice coil, 20 oz. magnet structure, 1/2" neodymium dome tweeter and a rubber boot magnet cover. Includes crossover (built-in capacitor), wires, and installation hardware. One year manufacturer's warranty. Sold in pairs

Specifications: • Impedance: 4 ohms • Frequency response: 100-20,000 Hz • Power handling: 60 watts RMS/120 watts max per pair • Mounting depth: 1-3/4".



Product Specifications
  • Speaker Size3-1/2"
  • Speaker Type2-Way
  • Power Handling (RMS)60 Watts
Pyle PLG3.2 3-1/2" Coaxial Speaker Pair
  • BrandPyle Audio
  • ModelPLG3.2
  • Part Number267-716
  • UPC068888874014
  • Product CategoryDash, Door & Deck Car Speakers
  • Unit of MeasurePR
  • Product Rating
    (8 Reviews)
  • Weight2.4001 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Pyle PLG3.2 3-1/2" Coaxial Speaker Pair
in the Dash, Door & Deck Car Speakers product category.

Reviews

Pyle PLG3.2 3-1/2" Coaxial Speaker Pair
Pyle PLG3.2 3-1/2" Coaxial Speaker Pair is rated 3.75 out of 5 by 8.
Rated 4 out of 5 by from Great price great speakersThese speakers are great for the price....my son loves them they are great addition to the Kicker's sub-woofer.
Date published: 2012-09-19
Rated 4 out of 5 by from Beware of that tweeterAlthough these speakers technically fit the opening in my 84 Hurst/Olds, and didn't need a wire connection adapter, I found it necessary to fabricate a different speaker grille to cover them. The tweeters protrude higher than the rim, something that wasn't made mention of in the other reviews I read and was undiscernable in the pics provided.
Date published: 2009-12-08
Rated 5 out of 5 by from great bang for the bucklet me explain my high ratings. i had a pair in the dash of my old ram 1500 for 6 years, they were x-overed @ 600 hz 12 db slope being driven along with 4 6x9's by an orion 8002 amp. 400 watts rms. i tried all the name brands in the book but these sound the best and handled the power the best. for under 20 bucks for a 3.5 speaker to perform and hold up deserves 5 stars.
Date published: 2009-10-25
Rated 4 out of 5 by from Not bad for the priceI have four of these, two each in both headrests of my Miata. It might be because they're not in any actual enclosure, just surrounded by dense foam, but they distort at a volume much lower than my door speakers. They sound ok and would be good for talk radio, but they have no bass whatsoever.
Date published: 2008-06-17
Rated 4 out of 5 by from Very satifactory replacement speakers.I replaced the two front speakers in an '86 Oldsmobile for my grandson, and he was pleasantly surprised at the performan of the forward speakers.
Date published: 2008-06-09
Rated 4 out of 5 by from All The aboveGreat speakers for the price.I sugjest you check your stereo specs.first.in a 97 chevy cav. wagon. the driver side is a bit of a tight fit, but it will fit !even with the rubbers.For those that see the need for bass,see your rear speakers, for these I sugjestthe bass stoppers,as these are 3.5" duh!please dont be a dunce and think these are for bass, these are for mids and highs.Great price, Great sound .
Date published: 2008-04-04

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pyle PLG3.2 3-1/2" Coaxial Speaker Pair

Wiring with existing?

Have Polk 4x6 in front doors... need some fill in mids and highs. Will these work and if so, do they wire in SERIES or PARALLEL with existing 4x6? I suppose SERIES to keep IMPEDANCE above 4 ohms. Please advise.
Asked by: Phil7782
I thought this was a PE Tech assist portal. So, I went ahead and chatted online with Chris in Tech Support who answered my concern and said to wire in SERIES and that the Filter is ONLY on the Tweeter and will not affect the signal going to the existing 4x6. So, I'm all set to order a pair.
Answered by: Phil7782
Date published: 2012-04-20

Customer Projects

Customer projects that include: Pyle PLG3.2 3-1/2" Coaxial Speaker Pair

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1