Pyle PH25 3" x 3" Horn Tweeter

Brand:| Model: PH25
When demands for widely dispersed, high frequency sounds are great, these horn tweeters are a superb solution.
Part # 
Weight: 0.98 lbs.  
List Price$22.99
You Save77%
Your Price
Buy 4-up$4.98
Part # 272-104
Qty:  EA
Available Payment Methods

Product Details

Pyle PH25 3" x 3" Horn Tweeter

When demands for widely dispersed, high frequency sounds are great, these horn tweeters are a superb solution. All models feature excellent transient response and are capable of handling very high SPL levels. Sold individually.

Specifications: • Power handling: 60 watts RMS/120 watts max • VCdia: 1" • Impedance: 8 ohms • Frequency response: 1,000-15,000 Hz • Magnet weight: 15 oz. • SPL: 100 dB 1W/1m • Cabinet cutout: 2-7/8".

Product Specifications
  • Diaphragm MaterialPoly / Mylar
  • Impedance8 ohms
  • Power Handling (RMS)60 Watts
Pyle PH25 3" x 3" Horn Tweeter
  • BrandPyle Audio
  • ModelPH25
  • Part Number272-104
  • UPC068888713221
  • Product CategoryHorn Loaded Bullet Tweeters
  • Unit of MeasureEA
  • Product Rating
    (13 Reviews)
  • Weight0.98 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

3-3/8" Bullet Tweeter
Part # 270-055
View similar products to the Pyle PH25 3" x 3" Horn Tweeter
in the Horn Loaded Bullet Tweeters product category.


Pyle PH25 3" x 3" Horn Tweeter
Pyle PH25 3" x 3" Horn Tweeter is rated 4.0 out of 5 by 13.
Rated 5 out of 5 by from good soundthese are good horns ..great sound at affordable price ,,
Date published: 2015-03-10
Rated 4 out of 5 by from awesome fixi ordered these tweeters to replace the blown ones in my cerwin vega d9 they fit almost perfectly except for the srew holes they brought the speakers back to life and so far they have withstood some serious jamming I would recommend them
Date published: 2013-06-18
Rated 1 out of 5 by from Be warned!These tweeters distort -- badly -- at high volumes. I listened to them once before going right back online and upgrading to the Selenium tweeters.
Date published: 2011-12-28
Rated 1 out of 5 by from bad unitsound gets distorted at high levelyou get what you pay for, maybe less
Date published: 2011-12-07
Rated 5 out of 5 by from Excellent productI bought two of these after I over-powered one of my tweeters on my speakers. These have very crisp, clear sound. I am extremely satisfied.
Date published: 2010-08-29
Rated 4 out of 5 by from sounds just like or better than originalswhen installing these be carefull with the terminals..when you push the faston terminals on to the speaker terms.you will find that they are weak or ready to break off..if you have to pull the wires off also be carefull..but they sound good...thanks
Date published: 2008-08-22
  • 2015-03-26T08:32CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_272-104, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pyle PH25 3" x 3" Horn Tweeter

I can not find a polarity indication anywhere. Which is terminal is positive, and which is negative.

Asked by: Robkt
With the tweeter sitting on the magnet facing up and the terminals face you, the one on the right is positive.
Answered by: MattP
Date published: 2014-11-03

Does the horn flare have a standard screw on termination so that the driver can be exchanged for other 1" screw type drivers?

Asked by: Tom Dawson
Unfortunately no, this driver is held to the horn with an un-standard screw pattern.
Answered by: MattP
Date published: 2014-08-26

What is the mounting diameter of this tweeter?

Asked by: Tandrel
Dimensions: 3.35"h x 3.35"w x 2.75"d
Answered by: Bret191
Date published: 2012-06-28
  • 2015-03-26T09:12CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_272-104, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: Pyle PH25 3" x 3" Horn Tweeter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software