292-208_ALT_1.jpg
292-208_ALT_1.jpg
 
292-208_ALT_0
 
292-208_ALT_1
 

Pyle PDMR6 6-1/2" Sealed Back Midrange

Brand:| Model: PDMR6
Overview
The sealed basket PDMR6 midrange does not require a separate enclosure, thereby simplifying custom installations.
Highlights
  • Sealed back design
  • Coated paper cone
  • 1'' high temperature voice coil
  • Polyimide VC former
  • 25 oz. magnet structure
  • Half-roll foam suspension
  • High efficiency
Part # 
292-208
Weight: 3.5 lbs.  
IN STOCK
List Price$48.99
You Save58%
Your Price
$20.56
Buy 4-up$19.15
Part # 292-208
Qty:  EA
Available Payment Methods

Product Details

Pyle PDMR6 6-1/2" Sealed Back Midrange

Pyle Pro professional P.A. drivers provide high quality sound reproduction in a wide range of sizes and capabilities. The sealed basket PDMR6 midrange does not require a separate enclosure, thereby simplifying custom installations. Coated paper cone, 1" high temp voice coil, half-roll foam edge suspension.



Product Specifications
  • Nominal Diameter6-1/2"
  • Power Handling (RMS)150 Watts
  • Power Handling (max)300 Watts
  • Impedance8 ohms
  • Frequency Response200 to 5,000 Hz
  • Sensitivity93 dB 1W/1m
  • Voice Coil Diameter1"
  • Magnet Weight25 oz.
Thiele-Small Parameters
  • Resonant Frequency (Fs)321 Hz
  • Mechanical Q (Qms)7.55
  • Electromagnetic Q (Qes)5.48
  • Total Q (Qts)3.18
  • Compliance Equivalent Volume (Vas)17.08 ft.³
Materials of Construction
  • Cone MaterialCoated Paper
  • Surround MaterialFoam
Mounting Information
  • Overall Outside Diameter6.54"
  • Baffle Cutout Diameter5.67"
  • Depth2.76"
  • # Mounting Holes4
Pyle PDMR6 6-1/2" Sealed Back Midrange
  • BrandPyle Audio
  • ModelPDMR6
  • Part Number292-208
  • UPC068888886789
  • Product CategoryWoofers, Subwoofers & Midrange Speakers
  • Unit of MeasureEA
  • Product Rating
    (4 Reviews)
  • Weight3.5 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Pyle PDMR6 6-1/2" Sealed Back Midrange
in the Woofers, Subwoofers & Midrange Speakers product category.

Reviews

Pyle PDMR6 6-1/2" Sealed Back Midrange
Pyle PDMR6 6-1/2" Sealed Back Midrange is rated 4.25 out of 5 by 4.
Rated 5 out of 5 by from Great to find a sead back squaker.Exelent replacement speaker for my philips front channel speakers. These easily outperform the original ones that the foam had rotted out of. Louder & cleaner at the same volume level. Looks better than some much more expensive speakers & has the sound to go with it.
Date published: 2014-04-22
Rated 4 out of 5 by from Love these midsI have a 2001 saturn sl2 one of the front doors leak and ruined one of the old speakers.I really was hoping for a bit more mid bass but it is adequate due to the excellent sound quality. I hear things I've never heard from my stock speakers. for instance, little missteps in live doors performances nuances if you will, I am extremely pleased with this purchase.INTENDED INSTALL:I did a DIY two way crossover with a super cheap dome tweeter Goldwood GT-510 1" Soft Dome Tweeter I think I need to cross them over a little lower and ill be happy.Ill put up another post when I get around to it to let you know what crossing sounds best.WAYS I TRIED THEM:I used these with a 80x2 blaupunkt amp from the 90's and they sounded great, I used my pioneer head unit and they sounded just as good saved me some power draw.I used them on the house stereo a few nights before I got around to installing them, Sounded great there too might get 4 for my home stereo as well, they really came alive there, had my hair standing up on my neck, WOW!DISLIKES:I didn't much like the terminals and they only had one tab each to right and left I would have preferred the downward ones if given the choice they don't have the dual direction ones shown. I ended up soldering leads to them since spade terminals made the connection too long for comfort and the terminals were quite flimsy though I suspect they were meant to have leads soldered anyways.
Date published: 2013-10-05
Rated 4 out of 5 by from great soundbought these one and half years ago, thought I blew one out so I bought another hear it was another issue with my reciever.These babys sound great and believe me they take abuse, abuse so well a buddy of mine seen and heard what these take from me he went and bought some.
Date published: 2012-10-26
Rated 4 out of 5 by from Good bang for your buckReplaced disintegrated 6-1/2 in. sealed back MRs in my Altec Model 9 (circa 1977). Had to ream out the cutout with a grinder and drill new mounting holes with new hurracane nuts since the old holes did not line up. Jazz alto saxaphone sounds great and female voices sound warm with excellent voice projection. What more could I ask for - for the price of a meal at Ruby Tuesdays?
Date published: 2011-08-28

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pyle PDMR6 6-1/2" Sealed Back Midrange

Customer Projects

Customer projects that include: Pyle PDMR6 6-1/2" Sealed Back Midrange

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1