Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Pyle PDMIC58 Dynamic Handheld Microphone
Can i use this microphone with lo z balanced cable instead of 1/4" ?
In my experience with microphones, you can use it with XLR cable in a balanced system but you might have to be careful about phantom power. Depending on it's internal wiring, you might short out your phantom power. So don't have a mic requiring that in the mix. Then again, it might be just fine.
Date published: 2015-01-16
Has anyone used this with phantom power present?
I was just wondering if anyone has run this mic on a phantom powered board or interface. Did it fry, or zap any faces... Pyle is turning out some decent gear as of late, so I imagine that detail is covered, but you never know.
This microphone does have a balanced output so it's not bothered by phantom power that some mixers have--all chs. on or off. Sometimes you may get a "thunk" when you plug in or unplug this mic with phantom on though--that true with most mixers. No zap if everything else is grounded.
Date published: 2013-10-09