Pyle PDBT48 2" Titanium Super Tweeter

Brand:| Model: PDBT48
The PDBT48 by Pyle is a 2" titanium super tweeter in a die cast aluminum frame.
Part # 
Weight: 5.38 lbs.  
List Price$71.99
You Save60%
Your Price
Part # 292-2562
Qty:  EA
Available Payment Methods

Product Details

Pyle PDBT48 2" Titanium Super Tweeter

The PDBT48 by Pyle is a 2" titanium super tweeter in a die cast aluminum frame. Crossover capacitor included. One year manufacturer's warranty.

Specifications: • Power handling: 150 watts RMS, 600 watts max • Frequency response: 2,000-25,000 Hz • Impedance: 4-8 ohms • Sensitivity: 106 dB 1W/1m • Dimensions: Diameter: 3-1/8", Mounting depth: 2".

Product Specifications
  • Diaphragm MaterialTitanium
  • Impedance8 ohms
  • Power Handling (RMS)150 Watts
Pyle PDBT48 2" Titanium Super Tweeter
  • BrandPyle Audio
  • ModelPDBT48
  • Part Number292-2562
  • UPC068888885775
  • Product CategoryHorn Loaded Bullet Tweeters
  • Unit of MeasureEA
  • Weight5.38 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Pyle PDBT48 2" Titanium Super Tweeter
in the Horn Loaded Bullet Tweeters product category.


Pyle PDBT48 2" Titanium Super Tweeter

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pyle PDBT48 2" Titanium Super Tweeter

What are the overall diagonal (") dimensions of this mounting flange? Thinking of adding tweeter to an old Allen Organ bass cabinet for PA use.

Asked by: Cazador
This driver measures 5" "corner to corner" and 4-1/4" across the flats. It requires a 3-1/8" diameter hole for mounting.
Answered by: MattP
Date published: 2014-07-10

Looking for rear mount hole diameter for the PylePro PDBT48.

Replacing 2" horns in Fisher ST-460 speakers. Existing hole is 60mm/2.36" and I would like to avoid cutting the hole bigger, at least not much bigger. Also the old horn is a Foster 4 Ohm, will this work OK?
Asked by: David VV
This product includes a mounting template, the cutout should be approximately 80mm (3.125"), so it will be significantly larger than the one you're replacing. I measured the Re of this product at 6.7Ω, so it would be considered an 8Ω nominal impedance. It may sound just fine with the existing crossover, or it could warrant a re-build of such, only you can be the judge.
Answered by: RussR
Date published: 2014-07-10

Customer Projects

Customer projects that include: Pyle PDBT48 2" Titanium Super Tweeter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Manuals / Resources

Need Help?
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA

© 1996-2014 Parts Express, All Rights Reserved