292-2550_ALT_0.jpg
292-2550_ALT_0.jpg
 
292-2550_ALT_0
 

Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt

Brand:| Model: PDB752
Overview
Pyle's PDB752 2" titanium horn driver has a 3" (76.2mm) flat aluminum voice coil for high power handling. Fits horns with four M6 threaded holes 90° apart on 4" (102mm) diameter circle.
Highlights
  • Midrange/tweeter compression horn driver
  • Titanium diaphragm
  • Terminals 205 type
  • One year manufacturer's warranty
Part # 
292-2550
Weight: 8.72 lbs.  
IN STOCK
List Price$126.99
You Save62%
Your Price
$48.12
Part # 292-2550
Qty:  EA
Available Payment Methods

Product Details

Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt

Pyle's PDB752 2" titanium horn driver has a 3" (76.2mm) flat aluminum voice coil for high power handling. Fits horns with four M6 threaded holes 90° apart on 4" (102mm) diameter circle.

Specifications: • Power input: 400 watts RMS, 800 watts peak power • Frequency response: 1 kHz - 20 kHz • Sensitivity: 107 dB @ 1W/1m • Impedance: 8 ohm • Magnet structure: 50 oz.



Product Specifications
  • Mounting Type4-Bolt
  • Exit Diameter2"
  • Diaphragm MaterialTitanium
  • Impedance8 ohms
  • Power Handling (RMS)400 Watts
Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt
  • BrandPyle Audio
  • ModelPDB752
  • Part Number292-2550
  • UPC068888727648
  • Product CategoryHorn Drivers
  • Unit of MeasureEA
  • Product Rating
    (3 Reviews)
  • Weight8.72 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt
in the Horn Drivers product category.

Reviews

Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt
Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt is rated 3.3333 out of 5 by 3.
Rated 4 out of 5 by from Successful experimentI was modding 2 two-way 15 cabs from a 1" exit to a 2" exit horn. I needed an inexpensive driver for testing. I'm leery of Pyle products though I have used them before. These drivers are of better quality than you'd expect at this price range. Smooth and efficient. I used it with the Eminence H2EA 2" Cast Aluminum Exponential Horn 60x40 part #290-551. I haven't analyzed them yet but two gigs in I'm happy with the results. Will be knocking off the cabs and buying more.
Date published: 2013-06-08
Rated 2 out of 5 by from just oki guess u get wat u pay for it play low i had to turn up my amp all the way an the hi section is not their ...not a good driver for hi's
Date published: 2011-03-03
Rated 4 out of 5 by from Surprizing GoodWell made and pretty good sounding drivers. Put them in your boxes and don't tell anyone and they'll never know. Need a little EQ, but crank'em and go.
Date published: 2010-09-16

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt

Does these drivers comes with the screws to bolt them on. I was using a modified bolt on adaptor on some PV CH 5 Horn lens

Asked by: Danvis
Yes these include mounting hardware.
Answered by: MattP
Date published: 2014-04-04

PYLE says 1.4" exit, Parts Express says 2" exit ????

Could someone please verify the correct dimensional property!
Asked by: rulgert
I share your frustration. However, by measuring the 4" spaces between the mounting holes, I get a 2" throat. Call PE directly on this [or PYLE].
Answered by: Joe from San Francisco
Date published: 2013-11-12

What is the best crossover point/type for this driver ?

Asked by: bpmusic
I would recommend no less than 1,200 Hz with a third order filter.
Answered by: MattP
Date published: 2013-09-03

Will this driver fit on my horn?

How far apart are the holes on this driver (In Inches)? My horn driver receptor is 4.5 inches from left to right and top to bottom. The bolt holes are 1/2 inch in from the outside and 2 1/4 inches apart... I need a 2" diaphragm/Driver (To go with my other horns and diaphragms). Will this driver work with my horn? Thank youPaul Johnson
Asked by: Paul J
From the description, the holes are on 4" centers. That's from one side of the driver to the other, not between the holes next to each other. Are you measuring the distance for your horn mounting holes the same way?
Answered by: Dr. Zhivago
Date published: 2013-04-17

Customer Projects

Customer projects that include: Pyle PDB752 2" Titanium Horn Driver 8 Ohm 4-Bolt

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Manuals / Resources

Need Help?
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1