Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Pyle PD3000A 3000 Watt AM-FM Receiver w/Built-In DVD/MP3/USB
does this receiver have a loud button? my pyle 3201atu did .. im gonna be running my paradigm tower speakers 3. 6 1/2 woffers in each tower for fronts and then my vm 10inch loudspeakers in the rear then my bic f12 powered subwoofer very loud setup
This receiver does not have a loud button.
Date published: 2015-07-22
CAN I INSTAL MY POWER AMP TO THIS AMP BECAUSE I WANNA USED THE POWER AMP FOR THE MIC AND THIS ONE FOR THE SPEAKER
Please contact our tech support for more help with this question, firstname.lastname@example.org or 800-338-0531 x1.
Date published: 2015-04-20
Would this stereo be enough to push two Cerwin Vega XLS-215's to there limit or close by itself without an amplifier?
This should have no problem powering those speakers by itself.
Date published: 2015-03-11
Is it enough power to pus a 800watt 15 subwoofer
This requires a bit more information in order to proceed. Please contact our tech support for more help with this question, email@example.com or 800-338-0531 x1.
Date published: 2015-01-19
How do you reset the unit? Becuse I push the program button on the remote and it froze
According to the manual you have to press the Enter/Play button on the remote in order to reset the DVD player to factory settings. This may not reset the whole unit, so you will have to contact Pyle to see if a full reset is possible.
Date published: 2015-01-16
can I hook up my proscessor with my eq and cassett deck and cd player. how about surround sound speakers
Unfortunately this unit does not have the proper provisions for connecting an EQ. The EQ will have to be placed between either the tape or CD players prior to being hooked up to this amplifier. This also is not a surround sound receiver, it only has stereo outputs.
Date published: 2014-08-01