Pyle P3001AT 3000W Amplifier with Preamp & AM/FM Tuner

Brand:|Model: P3001AT
Become the idol of your own living room with the 3,000 watt Pyle P3001AT mixer/amplifier. Independent microphone treble, bass, and echo controls will have you sounding like a stage veteran in no time!
In Stock
List Price$382.99
You Save57%
Your Price
Buy 4+$158.00
Part # 248-484
  • iPod/MP3 input
  • Dual 1/4" microphone inputs
  • 3,000W peak power output
  • 2-ohm stable hybrid amplifier section
  • Rack mountable design

Product Details

Pyle P3001AT 3000W Amplifier with Preamp & AM/FM Tuner

Become the idol of your own living room with the Pyle P3001AT. Independent microphone treble, bass, and echo controls will have you sounding like a stage veteran in no time! Sing along with CDs, MP3s, the radio—even a movie. The P3001AT also functions as a full featured stereo receiver with a two-ohm stable, high-power hybrid amplifier section. Dual stereo speaker outputs, with five-way binding posts, let you power multiple zones of your home. Included are AM/FM antennas that connect to the built-in quartz synthesized tuner for crystal clear radio reception. All controls are backlit for operability in low light conditions. Remote control and MP3/iPod connection cable are included. Microphones not included.

Features and Specifications: • Power output: 2 x 800 watts (1 kHz, peak power @ 2 ohms), 2 x 550 watts (1 kHz, peak power @ 4 ohms), 2 x 300 watts (1 kHz, peak power @ 8 ohms) • Frequency response: 40-15,000 Hz (±2 dB) • Two stereo RCA inputs • Stereo RCA record line-level output • Stereo RCA preamp output • Adjustable dual mono subwoofer outputs • Two 1/4" microphone inputs • 3.5 mm stereo input • 1/4" headphone output • AM/FM quartz synthesized tuner with auto station seek • Built-in rack ears • Dimensions: 3.1" H x 19" W x 13" D. Specifications provided by manufacturer.

Product Specifications
  • Special FeaturesFM Tuner,Remote Control
Pyle P3001AT 3000W Amplifier with Preamp & AM/FM Tuner
  • BrandPyle Audio
  • ModelP3001AT
  • Part Number248-484
  • UPC068888886352
  • Product CategoryHome Audio Amplifiers
  • Unit of MeasureEA
  • Product Rating
    (10 Reviews)
  • Weight18 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Pyle P3001AT 3000W Amplifier with Preamp & AM/FM Tuner
in the Home Audio Amplifiers product category.


Pyle P3001AT 3000W Amplifier with Preamp & AM/FM Tuner
Pyle P3001AT 3000W Amplifier with Preamp & AM/FM Tuner is rated 3.3 out of 5 by 10.
Rated 1 out of 5 by from Don't waste your time and money on this amp.I bought this amp a few years to play Christmas carols for a few weeks. It played for about 8 hours a day for two weeks then I packed it up and put it in a closet. Yesterday I pulled it out again to hook up to two 8 ohm speakers to power a set of electronic drums. It worked for about 30 minutes then one side blew. Basically this amp was switched on for less than 65 hours in its entire life and now one side failed. The fan is annoyingly loud as well and comes on immediately when the first signal is detected. There's NO WAY this amp has 3000 watts! Pyle has always way overstated the power output of their products. I don’t know how they can be allowed to exaggerate their power like that. I bought the amp because it was cheap not for the power rating, but I'd be surprised if this amp even has 100 watts per channel. I won’t be buying Pyle products again any time soon … you certainly get what you pay for with this company.
Date published: 2013-08-07
Rated 4 out of 5 by from Pyle P3001AT 3000wattThe first one didn't have screws to hold speaker outputs in place. The second one worked great about 20 minutes then the display went black. The third one is great, so far. I do sound on the side and needed an amp for the shop for my other work. This amp has great input options, and the mic inputs allows me to test a mic and many other things, without setting up a complete P-A.Not 3000 watts, by their description.The best thing about this amp is Parts-Express, they made this purchase a great idea, because they take care of their customers.
Date published: 2013-03-05
Rated 3 out of 5 by from Got what I paid for.Pyle is not a well known brand for quality but I thought I'd give this a try anyway. As soon as I powered it up I knew it was a mistake. The unit had an insane amount of buzzing from the speakers no matter what input was connected. The sound was also very imbalanced with one channel all treble and the other all bass. Parts Express however was great to deal with on the return and I have a Crown unit coming to replace this.
Date published: 2010-03-08
Rated 4 out of 5 by from Great Karaoke amp!I got this amp hooked up to my computer with 2 pairs of Klipsch speakers and a powered subwoofer. It has amazing power, and with the mic jacks and mix level, the kids love it for karaoke.. I have only one complaint. There is lots of hiss from the speakers even with the volume all the way down.
Date published: 2009-05-23
Rated 4 out of 5 by from Quality product, outstanding performance for priceA product like this is *extremely* useful in situations like multi-room music systems. We have used this product in our business, and it is able to safely and inexpensively power multiple pairs of speakers (impedance-matched of course, yielding 300Wpc peak @ 8 Ohm) simultaneously. The interface is fairly simple, but awkward to read -- too many lights & symbols, though it's clearly designed for people who like that. It worked fine right out of the box. However, it needs a large amount of ventilation so the top should be kept completely open (air inlets) and the rear fan exhaust as well. The fan makes a significant amount of noise when it kicks in, which is often, so it would be best if this amp were placed in an isolated area. The including rack mounts can be removed for shelf installation. The remote is simple, thankfully. This is an ideal multi-room / light commercial amp & preamp. I hope Pyle Pro builds upon this start with better products.
Date published: 2009-03-21
Rated 1 out of 5 by from ReviewIt Makes a noise at low Vol. I have a Friend got one makes the Same Noise. going to Return it And get my money Back...My Friend Just got a Yamaka. no Noise its the Amp...But it did have Good power...
Date published: 2009-03-05
  • 2015-11-25T06:45CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_248-484, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Pyle P3001AT 3000W Amplifier with Preamp & AM/FM Tuner

I just bought a home that has speakers in each room for house music, the owner told me I need to hook up a fm receiver "pre amp" to them because there is an amp for the system in the attic already.  Does this have pre amp outputs?

Asked by: JVitto

Thanks Greg T. ... now a big problem. I finally stumbled on how to tune in a numerical FM station. A lot of stations were somehow automatically installed but only one I liked. Now I install stations in #1 only next one #1 again etc.

Asked by: bob43
This requires a bit more information in order to proceed. Please contact our tech support for more help with this question, or 800-338-0531 x1.
Answered by: GregT
Date published: 2015-07-16

how do you attach speaker wire with those 8 strange thumbscrews?

Asked by: bob43
When the binding posts are unscrewed, their is a gap behind it to allow the speaker wire to be secured when the post is screwed back down.
Answered by: GregT
Date published: 2015-07-15

bridgeable ?

Asked by: Dragonz 413
Unfortunately no, this is not a bridgeable amplifier.
Answered by: MattP
Date published: 2013-08-01

is the sub out powerful enough to power a woofer or does it have to be hooked to a powered sub

Asked by: speaker freack
The subwoofer output is line level only which means it can only be hooking up to a powered subwoofer.
Answered by: MattP
Date published: 2012-12-10

Is this amp stable at 2 ohms?

Asked by: Fudgeeoo
Yes this amplifier will handle a 2 ohm load.
Answered by: MattP
Date published: 2012-09-04
  • 2015-11-25T07:07CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_7
  • loc_en_US, sid_248-484, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Get Sales Flyer
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1986-2015 Parts Express, All Rights Reserved

Live Chat Software