Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
PRV Audio 6MB200 6-1/2" Midbass Speaker 8 Ohm
Is this speaker a direct replacement for a Fourier 6 woofer?
Unfortunately we do not have a cross reference available. If you would email our tech support with as much information as you have for the driver you need replaced we can see if we have anything that will work for the application. email@example.com.
Date published: 2014-07-11
Would this work with a tweeter for a vocals-only PA speaker?
I am thinking about building some small PA speakers to be used for vocals only. Would these work for that?
Short answer is yes...be sure to crossover no higher than 2k
Date published: 2013-06-06
The spec for the surround says woven but looks like foam. Is it foam?
This is a woven cloth accordian surround.
Date published: 2012-10-02
QES of 1.71 doesn't it mean it has a smaller than normal magnet? Would this make for a weaker speaker and loss of punch??
This type of midbass driver is not designed to play much below its free air resonance which in this case is 140 Hz. These are designed more or less for mid-range/upper midbass reproduction and will not affect bass performance. With a Q that high an enclosure is not required, although at those frequencies an enclosure is not required anyway.
Date published: 2012-11-07