The "Impresario" mains are a sealed WtmW design measuring 9.0"w x 29.5"h x 11"d. It is intended to be a modified version of the "Dayton III" based design (sort of) with an improved mid frequency response. The stylish side panels accents its slant top with 2" radius corners and a matching simulated slant base. All vertical corners have ¾" round-over. The crossover is mounted on bottom, accessible through an isolation panel cover (a non-driver section). The finish is high gloss piano white lacquer. The Impresario's are not only speakers but furniture, stylishly finished achieving a very high "Spouse Approval Factor" (SAF), LOL....because wife's have hate-dar or something needing satisfaction. Stands will be needed however not fabricated at this time.

The "Impresario", center channel is a sealed MTM design measuring 7.5"w x 23.5"h x 10"d. It is a modified version of Curt C's Triune of near equal volume. It also has stylish top and bottom panels accenting its slant sides with 2" radius corners. All horizontal corners have ¾" round-over. The finish is high gloss piano white lacquer. My entertainment center's height is 60" tall requiring me to fabricate a wedge base (wedge angle is 5 degrees) placed below the center channel.